bikesetting

Haibike AllMtn CF: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 4 builds · RRP €7,199 – €9,000 · Bike type: Full-suspension e-MTB

The Haibike AllMtn CF is an e-MTB for trail and touring with 160 mm of fork travel and 160 mm at the rear. It is powered by Bosch Performance Line CX or Pinion E1.12 MGU. Below you will find all 4 current builds with fork, shock and shock size, plus SAG values in millimetres and a tyre pressure table.

Calculate the setup for your Haibike AllMtn CF →

All builds

Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, motor, weight and price according to the manufacturer. Wheel size: 29.

BuildForkShockShock sizeRear travelMotorWeightRRPCalculator
9RockShox Lyrik Base Rush RC (160 mm)RockShox Deluxe Select+ RT230x60–Bosch Performance Line CX
800 Wh
–€7,199Setup →
10 Trn/IqRockShox Psylo Gold RC (160 mm)RockShox Super Deluxe Select RT230x60160 mmPinion E1.12 MGU
800 Wh
–€8,000Setup →
9.5 ABSRockShox Psylo Gold RC ABS (160 mm)RockShox Deluxe Select+ RT230x60–Bosch Performance Line CX
800 Wh
–€8,000Setup →
11 Trn/IqRockShox ZEB Ultimate Charger 3.1 RC2 (160 mm)RockShox Super Deluxe Ultimate RC2T230x60160 mmPinion E1.12 MGU
800 Wh
–€9,000Setup →

How it compares

Up front the Haibike AllMtn CF runs 160 mm – 10 mm more than the 150 mm median we calculated from 101 bikes in the “e-MTB for trail and touring” category. Travel is the same front and rear at 160 mm each. Within Haibike’s e-mountain bikes, it sits between the Haibike Lyke and the Haibike Hybe on travel. Haibike builds the frame from carbon.

With a starting price of €7,199 (9), the Haibike AllMtn CF is above the category median (€5,500). The top build, 11 Trn/Iq, costs €9,000. Haibike uses RockShox suspension throughout. The fork line-up ranges from the RockShox Lyrik Base Rush RC to the RockShox ZEB Ultimate Charger 3.1 RC2. Drive comes from Bosch Performance Line CX or Pinion E1.12 MGU, paired with 800 Wh of battery capacity. Haibike gives a maximum system weight of 135 kg for bike, rider and luggage combined.

Setup notes for this spec

Target SAG for the Haibike AllMtn CF

Instead of percentages, this table gives SAG directly in millimetres, measurable with the O-ring on the stanchion and on the shock shaft. Change the pressure step by step until you reach the value; if Haibike gives its own target SAG, use that.

160 mm fork, 60.0 mm shock stroke (all builds)

Riding styleFork SAGShock SAG
XC / touring17 % = 27 mm24 % = 14.4 mm on the shock shaft
Trail20 % = 32 mm28 % = 16.8 mm on the shock shaft
Enduro / rough22 % = 35 mm30 % = 18.0 mm on the shock shaft
Bike park20 % = 32 mm27 % = 16.2 mm on the shock shaft

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

The values apply to 2.60″ wide tubeless tyres with a trail casing, including the e-MTB surcharge. With an inner tube add about 0.2 bar (2.9 psi), with an insert take off about 0.1 bar (1.5 psi). Stock tyres: Continental Kryptotal-Fr, Enduro Soft, foldable skin SL, 60-622.

Ready-to-ride weightFrontRear
60 kg1.40 bar (20 psi)1.60 bar (23 psi)
70 kg1.52 bar (22 psi)1.72 bar (25 psi)
80 kg1.64 bar (24 psi)1.84 bar (27 psi)
90 kg1.76 bar (26 psi)1.96 bar (28 psi)
100 kg1.88 bar (27 psi)2.08 bar (30 psi)
110 kg2.00 bar (29 psi)2.20 bar (32 psi)
120 kg2.12 bar (31 psi)2.32 bar (34 psi)

Air pressure in the fork and shock

You will find a suitable starting pressure on the sticker on the fork stanchion (or on the shock) or in the suspension manufacturers’ setup charts. Our calculator gives you a starting value including rebound for your weight and riding style. What matters afterwards is the measured SAG from the table above.

Note: all information without guarantee. Specs can differ by model year, frame size and market – the type plate, the owner’s manual and Haibike’s information are authoritative. Never exceed the maximum pressures of fork, shock, tyres and rims.

Sources

More Haibike bikes