bikesetting

Haibike Hybe: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 5 builds · RRP €7,499 – €11,000 · Bike type: Hardtail e-MTB

The Haibike Hybe is an e-enduro bike with 170 mm of fork travel. It is powered by Bosch Performance Line CX or Bosch Performance Line CX-R or Yamaha PW-XM. Here you will find all 5 current builds with fork, plus matching SAG and tyre pressure starting values.

Calculate the setup for your Haibike Hybe →

All builds

Fork, motor, weight and price according to the manufacturer. Wheel size: 29.

BuildForkMotorWeightRRPCalculator
CF 9 (RockShox ZEB)RockShox ZEB Base Rush RC (170 mm)Bosch Performance Line CX
800 Wh
–€7,499Setup →
CF 9 (RockShox ZEB) – Variante 2RockShox ZEB Select Charger RC (170 mm)Bosch Performance Line CX
800 Wh
–€7,499Setup →
10.5RockShox ZEB Ultimate Charger 3.1 RC2 (170 mm)Yamaha PW-XM
720 Wh
–€7,999Setup →
CF 11 (Bosch) – Variante 2RockShox ZEB Ultimate Charger 3.1 RC2 (170 mm)Bosch Performance Line CX
800 Wh
–€10,000Setup →
CF 11 (Bosch)RockShox ZEB Ultimate Charger 3.1 RC2 (170 mm)Bosch Performance Line CX-R
800 Wh
–€11,000Setup →

How it compares

170 mm at the fork almost exactly matches the 170 mm median of the 56 bikes in the “e-enduro bike” category in our database. On travel, it slots in between the Haibike AllMtn CF and the Haibike Nduro in the Haibike range. The frame is available in carbon or aluminium.

The starting price of €7,499 (CF 9 (RockShox ZEB)) is roughly in line with the category median (€6,900). The top build, CF 11 (Bosch), costs €11,000. Every build uses a RockShox fork. In total, 3 different forks are used, from the RockShox ZEB Base Rush RC to the RockShox ZEB Ultimate Charger 3.1 RC2. Drive comes from Bosch Performance Line CX or Yamaha PW-XM or Bosch Performance Line CX-R, paired with 720–800 Wh of battery capacity. According to Haibike, the maximum system weight (bike, rider and kit) is 120 kg.

Setup notes for this spec

Target SAG for the Haibike Hybe

The table converts the recommended SAG percentages into millimetres, so you can check them with the O-ring directly on the stanchion. Adjust the air pressure until the value is right. If Haibike specifies its own target SAG for your model, that takes priority.

170 mm fork (all builds)

Riding styleFork SAG
XC / touring17 % = 29 mm
Trail20 % = 34 mm
Enduro / rough22 % = 37 mm
Bike park20 % = 34 mm

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

The values apply to 2.60″ wide tubeless tyres with a trail casing, including the e-MTB surcharge. With an inner tube add about 0.2 bar (2.9 psi), with an insert take off about 0.1 bar (1.5 psi). Stock tyres: Continental Kryptotal-Fr, Enduro Soft, foldable skin SL, 60-622; Maxxis Assegai, 3C MaxxTerra, EXO+, TR, 120 TPI, 63-622.

Ready-to-ride weightFrontRear
60 kg1.40 bar (20 psi)1.60 bar (23 psi)
70 kg1.52 bar (22 psi)1.72 bar (25 psi)
80 kg1.64 bar (24 psi)1.84 bar (27 psi)
90 kg1.76 bar (26 psi)1.96 bar (28 psi)
100 kg1.88 bar (27 psi)2.08 bar (30 psi)
110 kg2.00 bar (29 psi)2.20 bar (32 psi)
120 kg2.12 bar (31 psi)2.32 bar (34 psi)

Air pressure in the fork

The sticker on the fork and the manufacturers’ setup charts give you a first pressure. Our calculator is more precise and suggests rebound too – always check the result via SAG.

Note: no guarantee is given. Specs can vary by model year, size and country; the type plate, the manual and Haibike are authoritative. The maximum pressures of fork, shock, tyres and rims always apply.

Sources

More Haibike bikes