bikesetting

Kellys Theos AX: suspension setup & specs

Manufacturer data retrieved on 27 September 2026 · 4 builds · Bike type: Full-suspension e-MTB

The Kellys Theos AX is an e-enduro bike with 170 mm of fork travel and 160 mm at the rear. It is powered by AVINOX M2 or AVINOX M2S. Here you will find all 4 current builds with fork, shock and shock size, plus matching SAG and tyre pressure starting values.

Calculate the setup for your Kellys Theos AX →

All builds

Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, motor, weight and price according to the manufacturer. Wheel size: 29.

BuildForkShockShock sizeRear travelMotorWeightRRPCalculator
20 29 800 WhRockShox Domain Gold R (170 mm)RockShox Super Deluxe205x65160 mmAVINOX M2
800 Wh
––Setup →
40 29 800 WhRockShox Zeb Select (170 mm)RockShox Super Deluxe205x65160 mmAVINOX M2
800 Wh
––Setup →
70 29 800 WhRockShox Zeb Select (170 mm)RockShox Super Deluxe Select205x65160 mmAVINOX M2
800 Wh
––Setup →
90 29 800 WhRockShox Zeb Ultimate (170 mm)RockShox Super Deluxe Select+205x65160 mmAVINOX M2S
800 Wh
––Setup →

How it compares

170 mm at the fork almost exactly matches the 170 mm median of the 56 bikes in the “e-enduro bike” category in our database. The rear offers 160 mm, 10 mm less than the front. No other Kellys model among its e-mountain bikes has more travel up front. The frame is made of aluminium.

Kellys uses RockShox suspension throughout. The fork line-up ranges from the RockShox Domain Gold R to the RockShox Zeb Ultimate. It is powered by AVINOX M2 or AVINOX M2S with a 800 Wh battery.

Setup notes for this spec

Target SAG for the Kellys Theos AX

SAG is the share of travel your weight already uses in the riding position. The table gives it straight in millimetres – read the O-ring on the stanchion and on the shock shaft and adjust the air pressure until it matches. Any figures from Kellys take priority.

170 mm fork, 65.0 mm shock stroke (all builds)

Riding styleFork SAGShock SAG
XC / touring17 % = 29 mm24 % = 15.6 mm on the shock shaft
Trail20 % = 34 mm28 % = 18.2 mm on the shock shaft
Enduro / rough22 % = 37 mm30 % = 19.5 mm on the shock shaft
Bike park20 % = 34 mm27 % = 17.6 mm on the shock shaft

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

Basis: 2.50″ tyre width, tubeless, trail casing, including the e-MTB surcharge. If you run tubes, add about 0.2 bar (2.9 psi); with an insert, about 0.1 bar (1.5 psi) less is enough. Stock tyres: SCHWALBE Magic Mary Gravity Pro Radial 63-622 (29"x2.50) TLR, Ultra Soft, folding / SCHWALBE Magic Mary Trail Pro Radial 63-622 (29"x2.50) TLR, Soft, folding; SCHWALBE Magic Mary Trail 62-622 (29"x2.40) TLR, Soft, folding / SCHWALBE Romy Trail 62-622 (29"x2.40) TLR, Mid, folding; SCHWALBE Magic Mary Trail Pro Radial 62-622 (29"x2.40) TLR, Soft, folding / SCHWALBE Romy Trail 62-622 (29"x2.40) TLR, Mid, folding.

Ready-to-ride weightFrontRear
60 kg1.48 bar (21 psi)1.68 bar (24 psi)
70 kg1.60 bar (23 psi)1.80 bar (26 psi)
80 kg1.72 bar (25 psi)1.92 bar (28 psi)
90 kg1.84 bar (27 psi)2.04 bar (30 psi)
100 kg1.96 bar (28 psi)2.16 bar (31 psi)
110 kg2.08 bar (30 psi)2.28 bar (33 psi)
120 kg2.20 bar (32 psi)2.40 bar (35 psi)

Air pressure in the fork and shock

The sticker on the fork (or on the shock) and the manufacturers’ setup charts give you a first pressure. Our calculator is more precise and suggests rebound too – always check the result via SAG.

Note: all information without guarantee. Specs can differ by model year, frame size and market – the type plate, the owner’s manual and Kellys’s information are authoritative. Never exceed the maximum pressures of fork, shock, tyres and rims.

Sources

More Kellys bikes