bikesetting

Radon Cragger: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 1 builds · RRP €1,399 · Bike type: Hardtail MTB

The Radon Cragger is a trail hardtail with 130 mm of fork travel. Here you will find all 1 current builds with fork, plus matching SAG and tyre pressure starting values.

Calculate the setup for your Radon Cragger →

All builds

Fork, weight and price according to the manufacturer. Wheel size: 29.

BuildForkWeightRRPCalculator
7.0Marzocchi Bomber Z2 (130 mm)13.1 kg€1,399Setup →

How it compares

130 mm at the fork almost exactly matches the 130 mm median of the 17 bikes in the “trail hardtail” category in our database. On travel, it slots in between the Radon Jealous and the Radon Jab in the Radon range.

At 13.1 kg (7.0 build), the weight is close to the category median of 13.2 kg. Prices for the Radon Cragger start at €1,399 (7.0), below the category median of €2,000. Every build uses a Marzocchi fork.

Setup notes for this spec

Target SAG for the Radon Cragger

The table converts the recommended SAG percentages into millimetres, so you can check them with the O-ring directly on the stanchion. Adjust the air pressure until the value is right. If Radon specifies its own target SAG for your model, that takes priority.

130 mm fork (all builds)

Riding styleFork SAG
XC / touring17 % = 22 mm
Trail20 % = 26 mm
Enduro / rough22 % = 29 mm
Bike park20 % = 26 mm

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

For 2.40″ wide tyres, tubeless with a trail casing. With an inner tube about 0.2 bar (2.9 psi) more, with an insert about 0.1 bar (1.5 psi) less. Stock tyres: Maxxis Forecaster 3C, Maxxterra, EXO, TR, 29" x 2.4.

Ready-to-ride weightFrontRear
60 kg1.43 bar (21 psi)1.63 bar (24 psi)
70 kg1.55 bar (22 psi)1.75 bar (25 psi)
80 kg1.67 bar (24 psi)1.87 bar (27 psi)
90 kg1.79 bar (26 psi)1.99 bar (29 psi)
100 kg1.91 bar (28 psi)2.11 bar (31 psi)
110 kg2.03 bar (29 psi)2.23 bar (32 psi)
120 kg2.15 bar (31 psi)2.35 bar (34 psi)

Air pressure in the fork

The sticker on the fork and the manufacturers’ setup charts give you a first pressure. Our calculator is more precise and suggests rebound too – always check the result via SAG.

Note: all values without guarantee. Specification can vary by model year, frame size and market – if in doubt, the type plate, the manual and Radon’s information apply. Never exceed maximum pressures.

Sources

More Radon bikes