bikesetting

Rose PDQ AL: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 2 builds · Bike type: Hardtail MTB

The Rose PDQ AL is a cross-country full-suspension bike with 120 mm of fork travel. This page lists the 2 current builds with fork and gives matching starting values for SAG and tyre pressure.

Calculate the setup for your Rose PDQ AL →

All builds

Fork, weight and price according to the manufacturer. Wheel size: 27.5 / 29.

BuildForkWeightRRPCalculator
1RockShox Judy Silver TK (120 mm)––Setup →
2RockShox Psylo Silver RC (120 mm)––Setup →

How it compares

120 mm at the fork almost exactly matches the 120 mm median of the 23 bikes in the “cross-country full-suspension bike” category in our database. Within Rose’s mountain bikes, it sits between the Rose Bruce and the Rose Scrub on travel.

Every build uses a RockShox fork. The fork line-up ranges from the RockShox Judy Silver TK to the RockShox Psylo Silver RC. Depending on build or size, the wheels are 27.5 / 29.

Setup notes for this spec

Target SAG for the Rose PDQ AL

The table converts the recommended SAG percentages into millimetres, so you can check them with the O-ring directly on the stanchion. Adjust the air pressure until the value is right. If Rose specifies its own target SAG for your model, that takes priority.

120 mm fork (all builds)

Riding styleFork SAG
XC / touring17 % = 20 mm
Trail20 % = 24 mm
Enduro / rough22 % = 26 mm
Bike park20 % = 24 mm

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

Basis: 2.40″ tyre width, tubeless, trail casing. If you run tubes, add about 0.2 bar (2.9 psi); with an insert, about 0.1 bar (1.5 psi) less is enough. Stock tyres: Schwalbe Nobby Nic, schwarz 29x2,4; Schwalbe Nobby Nic, schwarz 27,5x2,4.

Ready-to-ride weightFrontRear
60 kg1.43 bar (21 psi)1.63 bar (24 psi)
70 kg1.55 bar (22 psi)1.75 bar (25 psi)
80 kg1.67 bar (24 psi)1.87 bar (27 psi)
90 kg1.79 bar (26 psi)1.99 bar (29 psi)
100 kg1.91 bar (28 psi)2.11 bar (31 psi)
110 kg2.03 bar (29 psi)2.23 bar (32 psi)
120 kg2.15 bar (31 psi)2.35 bar (34 psi)

Air pressure in the fork

You will find a suitable starting pressure on the sticker on the fork stanchion or in the suspension manufacturers’ setup charts. Our calculator gives you a starting value including rebound for your weight and riding style. What matters afterwards is the measured SAG from the table above.

Note: all information without guarantee. Specs can differ by model year, frame size and market – the type plate, the owner’s manual and Rose’s information are authoritative. Never exceed the maximum pressures of fork, shock, tyres and rims.

Sources

More Rose bikes