YT Tues 27: suspension setup & specs
The YT Tues 27 is a freeride bike with 200 mm of fork travel. This page lists the 1 current builds with fork and gives matching starting values for SAG and tyre pressure.
Calculate the setup for your YT Tues 27 →
All builds
Fork, weight and price according to the manufacturer. Wheel size: 27.5".
| Build | Fork | Weight | RRP | Calculator |
|---|---|---|---|---|
| CORE 1 | Marzocchi Bomber 58 (200 mm) | – | – | Setup → |
How it compares
Up front the YT Tues 27 runs 200 mm – 20 mm more than the 180 mm median we calculated from 12 bikes in the “freeride bike” category. No other YT model among its mountain bikes has more travel up front.
Every build uses a Marzocchi fork.
Setup notes for this spec
- Fork (Marzocchi Bomber 58): air goes in through the valve on top of the left leg. After every change, compress the fork firmly a few times before measuring SAG.
- Rebound: turn the red Marzocchi adjuster fully closed first and count clicks from there – that way you can note settings and restore them later.
- Hardtail: without rear suspension, rear tyre pressure largely decides comfort and traction – it is worth testing in 0.1 bar (1.5 psi) steps.
Target SAG for the YT Tues 27
The table converts the recommended SAG percentages into millimetres, so you can check them with the O-ring directly on the stanchion. Adjust the air pressure until the value is right. If YT specifies its own target SAG for your model, that takes priority.
200 mm fork (all builds)
| Riding style | Fork SAG |
|---|---|
| XC / touring | 17 % = 34 mm |
| Trail | 20 % = 40 mm |
| Enduro / rough | 22 % = 44 mm |
| Bike park | 20 % = 40 mm |
How to measure SAG is explained in our guide SAG setup.
Tyre pressure starting values
Basis: 2.40″ tyre width, tubeless, trail casing. If you run tubes, add about 0.2 bar (2.9 psi); with an insert, about 0.1 bar (1.5 psi) less is enough.
| Ready-to-ride weight | Front | Rear |
|---|---|---|
| 60 kg | 1.43 bar (21 psi) | 1.63 bar (24 psi) |
| 70 kg | 1.55 bar (22 psi) | 1.75 bar (25 psi) |
| 80 kg | 1.67 bar (24 psi) | 1.87 bar (27 psi) |
| 90 kg | 1.79 bar (26 psi) | 1.99 bar (29 psi) |
| 100 kg | 1.91 bar (28 psi) | 2.11 bar (31 psi) |
| 110 kg | 2.03 bar (29 psi) | 2.23 bar (32 psi) |
| 120 kg | 2.15 bar (31 psi) | 2.35 bar (34 psi) |
Air pressure in the fork
You will find a suitable starting pressure on the sticker on the fork stanchion or in the suspension manufacturers’ setup charts. Our calculator gives you a starting value including rebound for your weight and riding style. What matters afterwards is the measured SAG from the table above.