Evil Following LS: suspension setup & specs
The Evil Following LS is a downcountry bike with – mm of fork travel and 121 mm at the rear. Here you will find all 1 current builds with fork, shock and shock size, plus matching SAG and tyre pressure starting values.
Calculate the setup for your Evil Following LS →
All builds
Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, weight and price according to the manufacturer. Wheel size: 29.
| Build | Fork | Shock | Shock size | Rear travel | Weight | RRP | Calculator |
|---|---|---|---|---|---|---|---|
| Following LS | Check manually | Check manually | – | 121 mm | – | – | Setup → |
How it compares
The frame is made of carbon.
Setup notes for this spec
- Air shock (Check manually): measure SAG in your riding position, ideally with a helper holding the bike. Cycle the shock a few times after every pressure change.
Target SAG for the Evil Following LS
SAG is the share of travel your weight already uses in the riding position. The table gives it straight in millimetres – read the O-ring on the stanchion and on the shock shaft and adjust the air pressure until it matches. Any figures from Evil take priority.
How to measure SAG is explained in our guide SAG setup.
Tyre pressure starting values
Basis: 2.40″ tyre width, tubeless, trail casing. If you run tubes, add about 0.2 bar (2.9 psi); with an insert, about 0.1 bar (1.5 psi) less is enough.
| Ready-to-ride weight | Front | Rear |
|---|---|---|
| 60 kg | 1.43 bar (21 psi) | 1.63 bar (24 psi) |
| 70 kg | 1.55 bar (22 psi) | 1.75 bar (25 psi) |
| 80 kg | 1.67 bar (24 psi) | 1.87 bar (27 psi) |
| 90 kg | 1.79 bar (26 psi) | 1.99 bar (29 psi) |
| 100 kg | 1.91 bar (28 psi) | 2.11 bar (31 psi) |
| 110 kg | 2.03 bar (29 psi) | 2.23 bar (32 psi) |
| 120 kg | 2.15 bar (31 psi) | 2.35 bar (34 psi) |
Air pressure in the fork and shock
You will find a guide value for air pressure on the fork sticker (or on the shock) or in the suspension makers’ charts. Our calculator also takes riding style and rebound into account. In the end, measured SAG is what counts.