KTM Myroon: suspension setup & specs
The KTM Myroon is a cross-country hardtail with 100 mm of fork travel. Here you will find all 5 current builds with fork, plus matching SAG and tyre pressure starting values.
Calculate the setup for your KTM Myroon →
All builds
Fork, weight and price according to the manufacturer. Wheel size: 29.
| Build | Fork | Weight | RRP | Calculator |
|---|---|---|---|---|
| Elite | FOX 32 Float (100 mm) | 11.6 kg | – | Setup → |
| Exonic | FOX 32SC Float (100 mm) | 8.8 kg | – | Setup → |
| Master | FOX 32SC Float (100 mm) | 10.4 kg | – | Setup → |
| Prime | FOX 32SC Float (100 mm) | 9.9 kg | – | Setup → |
| Pro | RockShox Judy Slv TK (100 mm) | 12.6 kg | – | Setup → |
How it compares
100 mm at the fork almost exactly matches the 100 mm median of the 46 bikes in the “cross-country hardtail” category in our database. Within KTM’s mountain bikes, it sits between the KTM Penny Lane and the KTM Scarp MT on travel. The frame is made of carbon.
The KTM Myroon does well on weight: 8.8 kg for the Exonic build is 1.2 kg below the median of comparable bikes (10.0 kg). Within the range, weight varies by 3.8 kg. In total, 3 different forks are used, from the FOX 32 Float to the RockShox Judy Slv TK. KTM specifies a maximum system weight of 109 kg. Subtracting roughly 13 kg for the bike leaves about 96 kg for rider, clothing, backpack and luggage.
Setup notes for this spec
- Fork (FOX 32 Float): air goes in through the valve on top of the left leg. After every change, compress the fork firmly a few times before measuring SAG.
- Rebound: on FOX and RockShox suspension the rebound adjuster is red. Always count clicks from fully closed (clockwise to the stop) so you can return to any setting.
- Hardtail: only the fork needs setting up. With no rear suspension, rear tyre pressure is the key adjustment for comfort and grip.
Target SAG for the KTM Myroon
The table converts the recommended SAG percentages into millimetres, so you can check them with the O-ring directly on the stanchion. Adjust the air pressure until the value is right. If KTM specifies its own target SAG for your model, that takes priority.
100 mm fork (all builds)
| Riding style | Fork SAG |
|---|---|
| XC / touring | 17 % = 17 mm |
| Trail | 20 % = 20 mm |
| Enduro / rough | 22 % = 22 mm |
| Bike park | 20 % = 20 mm |
How to measure SAG is explained in our guide SAG setup.
Tyre pressure starting values
Basis: 2.24″ tyre width, tubeless, trail casing. If you run tubes, add about 0.2 bar (2.9 psi); with an insert, about 0.1 bar (1.5 psi) less is enough. Stock tyres: Maxxis Rekon Race EXO Wire 57-622 / Maxxis Rekon Race EXO Wire 57-622; Maxxis Rekon Race EXO/TR 57-622 / Maxxis Rekon Race EXO/TR 57-622; Schwalbe Racing Ray Evo SuperRace TLE 57-622 / Schwalbe RICK XC PRO EVO SuperRace TLE 57-622.
| Ready-to-ride weight | Front | Rear |
|---|---|---|
| 60 kg | 1.53 bar (22 psi) | 1.73 bar (25 psi) |
| 70 kg | 1.65 bar (24 psi) | 1.85 bar (27 psi) |
| 80 kg | 1.77 bar (26 psi) | 1.97 bar (29 psi) |
| 90 kg | 1.89 bar (27 psi) | 2.09 bar (30 psi) |
| 100 kg | 2.01 bar (29 psi) | 2.21 bar (32 psi) |
| 110 kg | 2.13 bar (31 psi) | 2.33 bar (34 psi) |
| 120 kg | 2.25 bar (33 psi) | 2.45 bar (36 psi) |
Air pressure in the fork
You will find a suitable starting pressure on the sticker on the fork stanchion or in the suspension manufacturers’ setup charts. Our calculator gives you a starting value including rebound for your weight and riding style. What matters afterwards is the measured SAG from the table above.