Mondraker Level: suspension setup & specs
The Mondraker Level is an e-enduro bike with 180 mm of fork travel and 170 mm at the rear. It is powered by Bosch Performance Line CX. Below you will find all 3 current builds with fork, shock and shock size, plus SAG values in millimetres and a tyre pressure table.
Calculate the setup for your Mondraker Level →
All builds
Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, motor, weight and price according to the manufacturer. Wheel size: MX.
| Build | Fork | Shock | Shock size | Rear travel | Motor | Weight | RRP | Calculator |
|---|---|---|---|---|---|---|---|---|
| R | RockShox ZEB Select Charger RC 29 (180 mm) | RockShox Vivid Coil Base | 205x65 | 170 mm | Bosch Performance Line CX 800 Wh | – | €6,999 | Setup → |
| RR | Fox 38 29 Float GRIPX2 Factory Kashima (180 mm) | Fox DHX2 Performance Elite | 205x65 | 170 mm | Bosch Performance Line CX 800 Wh | – | €8,499 | Setup → |
| XR | Öhlins RXF 38 M.3 29 (180 mm) | Öhlins TTX22M.2 | 205x65 | 170 mm | Bosch Performance Line CX 800 Wh | – | €9,999 | Setup → |
How it compares
With 180 mm at the fork, the Mondraker Level sits above average: across the 56 bikes in the “e-enduro bike” category in our database, the median is 170 mm. The rear offers 170 mm, 10 mm less than the front. Among Mondraker’s e-mountain bikes, the Mondraker Level is the model with the most fork travel. The frame is made of aluminium.
The starting price of €6,999 (R) is roughly in line with the category median (€6,900). The top build, XR, costs €9,999. For suspension, Mondraker combines components from FOX, RockShox and Öhlins. The fork line-up ranges from the RockShox ZEB Select Charger RC 29 to the Öhlins RXF 38 M.3 29. The R build uses a coil shock (RockShox Vivid Coil Base), so SAG is set with the spring rate rather than air pressure. Drive comes from Bosch Performance Line CX, paired with 800 Wh of battery capacity.
Setup notes for this spec
- Air fork (RockShox ZEB Select Charger RC 29): the air valve is on top of the left leg under a cap. Change pressure in small steps (about 5 psi (0.34 bar)) and cycle the fork a few times afterwards so the air chambers can equalise.
- Rebound: on FOX and RockShox suspension the rebound adjuster is red. Always count clicks from fully closed (clockwise to the stop) so you can return to any setting.
- Coil shock (RockShox Vivid Coil Base): SAG is determined by the spring rate. Only add enough preload to stop the spring from rattling.
- Shock (Öhlins TTX22M.2): get on the bike in your normal riding position, step off carefully and read the O-ring. Always cycle the shock a few times after pumping.
- e-MTB: the extra weight mainly affects tyre pressure, which is why the table below already includes a surcharge. SAG is measured just as on a bike without a motor.
Target SAG for the Mondraker Level
Instead of percentages, this table gives SAG directly in millimetres, measurable with the O-ring on the stanchion and on the shock shaft. Change the pressure step by step until you reach the value; if Mondraker gives its own target SAG, use that.
180 mm fork, 65.0 mm shock stroke (all builds)
| Riding style | Fork SAG | Shock SAG |
|---|---|---|
| XC / touring | 17 % = 31 mm | 24 % = 15.6 mm on the shock shaft |
| Trail | 20 % = 36 mm | 28 % = 18.2 mm on the shock shaft |
| Enduro / rough | 22 % = 40 mm | 30 % = 19.5 mm on the shock shaft |
| Bike park | 20 % = 36 mm | 27 % = 17.6 mm on the shock shaft |
How to measure SAG is explained in our guide SAG setup.
Tyre pressure starting values
Basis: 2.60″ tyre width, tubeless, trail casing, including the e-MTB surcharge. If you run tubes, add about 0.2 bar (2.9 psi); with an insert, about 0.1 bar (1.5 psi) less is enough.
| Ready-to-ride weight | Front | Rear |
|---|---|---|
| 60 kg | 1.40 bar (20 psi) | 1.60 bar (23 psi) |
| 70 kg | 1.52 bar (22 psi) | 1.72 bar (25 psi) |
| 80 kg | 1.64 bar (24 psi) | 1.84 bar (27 psi) |
| 90 kg | 1.76 bar (26 psi) | 1.96 bar (28 psi) |
| 100 kg | 1.88 bar (27 psi) | 2.08 bar (30 psi) |
| 110 kg | 2.00 bar (29 psi) | 2.20 bar (32 psi) |
| 120 kg | 2.12 bar (31 psi) | 2.32 bar (34 psi) |
Air pressure in the fork and shock
You will find a guide value for air pressure on the fork sticker (or on the shock) or in the suspension makers’ charts. Our calculator also takes riding style and rebound into account. In the end, measured SAG is what counts.