bikesetting

Propain Spindrift AL Dual Crown: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 4 builds · RRP €3,399 – €6,144 · Bike type: Full-suspension MTB

The Propain Spindrift AL Dual Crown is a freeride bike with 200 mm of fork travel and 180 mm at the rear. Below you will find all 4 current builds with fork, shock and shock size, plus SAG values in millimetres and a tyre pressure table.

Calculate the setup for your Propain Spindrift AL Dual Crown →

All builds

Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, weight and price according to the manufacturer. Wheel size: 29.

BuildForkShockShock sizeRear travelWeightRRPCalculator
BaseRockShox Boxxer Select (200 mm)Vivid Coil Select–180 mm–€3,399Setup →
-Single SpeedÖhlins DH38 m.2 (200 mm)Öhlins TTX 22 Coil–180 mm–€4,984Setup →
FactoryFox 40 Factory Grip X2 (200 mm)Fox Float X2 Factory–180 mm–€6,039Setup →
UltimateRockShox Boxxer Ultimate Electric Red (200 mm)RockShox Vivid Coil Ultimate–180 mm–€6,144Setup →

How it compares

With 200 mm at the fork, the Propain Spindrift AL Dual Crown sits above average: across the 12 bikes in the “freeride bike” category in our database, the median is 180 mm. The rear offers 180 mm, 20 mm less than the front. Among Propain’s mountain bikes, the Propain Spindrift AL Dual Crown is the model with the most fork travel. Propain builds the frame from aluminium.

The starting price of €3,399 (Base) is roughly in line with the category median (€3,270). The top build, Ultimate, costs €6,144. For suspension, Propain combines components from FOX, RockShox and Öhlins. The fork line-up ranges from the RockShox Boxxer Select to the RockShox Boxxer Ultimate Electric Red. With the Vivid Coil Select, the Base build has a coil shock – here the spring rate determines SAG.

Setup notes for this spec

Target SAG for the Propain Spindrift AL Dual Crown

Instead of percentages, this table gives SAG directly in millimetres, measurable with the O-ring on the stanchion and on the shock shaft. Change the pressure step by step until you reach the value; if Propain gives its own target SAG, use that.

200 mm fork (all builds)

Riding styleFork SAG
XC / touring17 % = 34 mm
Trail20 % = 40 mm
Enduro / rough22 % = 44 mm
Bike park20 % = 40 mm

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

The values apply to 2.40″ wide tubeless tyres with a trail casing. With an inner tube add about 0.2 bar (2.9 psi), with an insert take off about 0.1 bar (1.5 psi).

Ready-to-ride weightFrontRear
60 kg1.43 bar (21 psi)1.63 bar (24 psi)
70 kg1.55 bar (22 psi)1.75 bar (25 psi)
80 kg1.67 bar (24 psi)1.87 bar (27 psi)
90 kg1.79 bar (26 psi)1.99 bar (29 psi)
100 kg1.91 bar (28 psi)2.11 bar (31 psi)
110 kg2.03 bar (29 psi)2.23 bar (32 psi)
120 kg2.15 bar (31 psi)2.35 bar (34 psi)

Air pressure in the fork and shock

You will find a guide value for air pressure on the fork sticker (or on the shock) or in the suspension makers’ charts. Our calculator also takes riding style and rebound into account. In the end, measured SAG is what counts.

Note: all information without guarantee. Specs can differ by model year, frame size and market – the type plate, the owner’s manual and Propain’s information are authoritative. Never exceed the maximum pressures of fork, shock, tyres and rims.

Sources

More Propain bikes