bikesetting

Commencal Meta Power SX 400: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 4 builds · Bike type: Full-suspension e-MTB

The Commencal Meta Power SX 400 is an e-enduro bike with 170 mm of fork travel and 170 mm at the rear. It is powered by BOSCH Performance Line SX. Here you will find all 4 current builds with fork, shock and shock size, plus matching SAG and tyre pressure starting values.

Calculate the setup for your Commencal Meta Power SX 400 →

All builds

Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, motor, weight and price according to the manufacturer. Wheel size: MX.

BuildForkShockShock sizeRear travelMotorWeightRRPCalculator
AXS LimitedFOX 38 Factory (170 mm)FOX Float X2 Factory230x65170 mmBOSCH Performance Line SX
400 Wh
––Setup →
Essential Eagle 90 2026FOX 38 Performance E-Bike (170 mm)FOX Float X Performance230x65170 mmBOSCH Performance Line SX
400 Wh
––Setup →
Signature AXS 2025FOX 38 Factory E-Bike (170 mm)FOX Float X Factory230x65170 mmBOSCH Performance Line SX
400 Wh
––Setup →
Signature Eagle 90 2026FOX 38 Factory E-Bike (170 mm)FOX Float X Factory230x65170 mmBOSCH Performance Line SX
400 Wh
––Setup →

How it compares

On travel, the Commencal Meta Power SX 400 is right where the “e-enduro bike” category usually is: 170 mm up front against a median of 170 mm from 56 bikes. Travel is the same front and rear at 170 mm each. Within Commencal’s e-mountain bikes, it sits between the Commencal T.E.M.P.O. Power and the Commencal Meta Power SX 800 on travel. The frame is made of aluminium.

Commencal uses FOX suspension throughout. In total, 3 different forks are used, from the FOX 38 Factory to the FOX 38 Factory E-Bike. It is powered by BOSCH Performance Line SX with a 400 Wh battery.

Setup notes for this spec

Target SAG for the Commencal Meta Power SX 400

SAG is the share of travel your weight already uses in the riding position. The table gives it straight in millimetres – read the O-ring on the stanchion and on the shock shaft and adjust the air pressure until it matches. Any figures from Commencal take priority.

170 mm fork, 65.0 mm shock stroke (all builds)

Riding styleFork SAGShock SAG
XC / touring17 % = 29 mm24 % = 15.6 mm on the shock shaft
Trail20 % = 34 mm28 % = 18.2 mm on the shock shaft
Enduro / rough22 % = 37 mm30 % = 19.5 mm on the shock shaft
Bike park20 % = 34 mm27 % = 17.6 mm on the shock shaft

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

The values apply to 2.50″ wide tubeless tyres with a trail casing, including the e-MTB surcharge. With an inner tube add about 0.2 bar (2.9 psi), with an insert take off about 0.1 bar (1.5 psi). Stock tyres: Rear: MAXXIS Minion DHRII 27.5'' - Front: MAXXIS ASSEGAI 29''; Rear: SCHWALBE Tacky Chan - Front: SCHWALBE Magic Mary; SCHWALBE MAGIC MARY.

Ready-to-ride weightFrontRear
60 kg1.48 bar (21 psi)1.68 bar (24 psi)
70 kg1.60 bar (23 psi)1.80 bar (26 psi)
80 kg1.72 bar (25 psi)1.92 bar (28 psi)
90 kg1.84 bar (27 psi)2.04 bar (30 psi)
100 kg1.96 bar (28 psi)2.16 bar (31 psi)
110 kg2.08 bar (30 psi)2.28 bar (33 psi)
120 kg2.20 bar (32 psi)2.40 bar (35 psi)

Air pressure in the fork and shock

You will find a suitable starting pressure on the sticker on the fork stanchion (or on the shock) or in the suspension manufacturers’ setup charts. Our calculator gives you a starting value including rebound for your weight and riding style. What matters afterwards is the measured SAG from the table above.

Note: all information without guarantee. Specs can differ by model year, frame size and market – the type plate, the owner’s manual and Commencal’s information are authoritative. Never exceed the maximum pressures of fork, shock, tyres and rims.

Sources

More Commencal bikes