bikesetting

Commencal Meta SX V4: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 6 builds · Bike type: Full-suspension MTB

The Commencal Meta SX V4 is an enduro bike with 170 mm of fork travel and 160 mm at the rear. Here you will find all 6 current builds with fork, shock and shock size, plus matching SAG and tyre pressure starting values.

Calculate the setup for your Commencal Meta SX V4 →

All builds

Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, weight and price according to the manufacturer. Wheel size: MX.

BuildForkShockShock sizeRear travelWeightRRPCalculator
EssentialFOX 38 Performance (170 mm)FOX Float X Performance230x62.5160 mm––Setup →
Essential 2025FOX 38 Performance (170 mm)FOX Float X Performance230x62.5160 mm––Setup →
OriginROCKSHOX Domain R (170 mm)ROCKSHOX Deluxe Select230x62.5160 mm––Setup →
RaceROCKSHOX ZEB ULTIMATE (170 mm)ROCKSHOX Super Deluxe Ultimate230x62.5160 mm––Setup →
RaceROCKSHOX Zeb Ultimate (170 mm)ROCKSHOX Super Deluxe Ultimate230x62.5160 mm––Setup →
SignatureFOX 38 Factory (170 mm)FOX Float X2 Factory230x62.5160 mm––Setup →

How it compares

On travel, the Commencal Meta SX V4 is right where the “enduro bike” category usually is: 170 mm up front against a median of 170 mm from 41 bikes. The rear offers 160 mm, 10 mm less than the front. On travel, it slots in between the Commencal Meta V5 and the Commencal Clash V2 in the Commencal range. The frame is made of aluminium.

Depending on the build, fork and shock come from FOX and RockShox. The fork line-up ranges from the FOX 38 Performance to the FOX 38 Factory.

Setup notes for this spec

Target SAG for the Commencal Meta SX V4

The table converts the recommended SAG percentages into millimetres, so you can check them with the O-ring directly on the stanchion and on the shock shaft. Adjust the air pressure until the value is right. If Commencal specifies its own target SAG for your model, that takes priority.

170 mm fork, 62.5 mm shock stroke (all builds)

Riding styleFork SAGShock SAG
XC / touring17 % = 29 mm24 % = 15.0 mm on the shock shaft
Trail20 % = 34 mm28 % = 17.5 mm on the shock shaft
Enduro / rough22 % = 37 mm30 % = 18.8 mm on the shock shaft
Bike park20 % = 34 mm27 % = 16.9 mm on the shock shaft

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

For 2.40″ wide tyres, tubeless with a trail casing. With an inner tube about 0.2 bar (2.9 psi) more, with an insert about 0.1 bar (1.5 psi) less. Stock tyres: Rear: MAXXIS DHR II - Front: MAXXIS Assegai; Rear: SCHWALBE Big Betty - Front: SCHWALBE Magic Mary.

Ready-to-ride weightFrontRear
60 kg1.43 bar (21 psi)1.63 bar (24 psi)
70 kg1.55 bar (22 psi)1.75 bar (25 psi)
80 kg1.67 bar (24 psi)1.87 bar (27 psi)
90 kg1.79 bar (26 psi)1.99 bar (29 psi)
100 kg1.91 bar (28 psi)2.11 bar (31 psi)
110 kg2.03 bar (29 psi)2.23 bar (32 psi)
120 kg2.15 bar (31 psi)2.35 bar (34 psi)

Air pressure in the fork and shock

You will find a suitable starting pressure on the sticker on the fork stanchion (or on the shock) or in the suspension manufacturers’ setup charts. Our calculator gives you a starting value including rebound for your weight and riding style. What matters afterwards is the measured SAG from the table above.

Note: no guarantee is given. Specs can vary by model year, size and country; the type plate, the manual and Commencal are authoritative. The maximum pressures of fork, shock, tyres and rims always apply.

Sources

More Commencal bikes