Commencal Meta TR V4: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 8 builds · Bike type: Full-suspension MTB

The Commencal Meta TR V4 is a trail bike with 150–160 mm of fork travel and 140 mm at the rear. Here you will find all 8 current builds with fork, shock and shock size, plus matching SAG and tyre pressure starting values.

Calculate the setup for your Commencal Meta TR V4 →

All builds

Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, weight and price according to the manufacturer. Wheel size: 29.

Build	Fork	Shock	Shock size	Rear travel	Weight	RRP	Calculator
Essential	FOX 36 Performance (150 mm)	FOX Float DPS Performance	210x55	140 mm	–	–	Setup →
Ohlins Edition	OHLINS RXF36 m.2 Air (150 mm)	OHLINS TTX1 Air	210x55	140 mm	–	–	Setup →
Origin	ROCKSHOX 35 Silver R (150 mm)	ROCKSHOX Deluxe Select	210x55	140 mm	–	–	Setup →
Race	ROCKSHOX Lyrik Ultimate (160 mm)	ROCKSHOX Super Deluxe Coil Ultimate	210x55	140 mm	–	–	Setup →
Ride	ROCKSHOX Revelation RC (150 mm)	ROCKSHOX Deluxe Select +	210x55	140 mm	–	–	Setup →
Ride 2025	SRAM Lyrik Base (160 mm)	SRAM Deluxe Select +	210x55	140 mm	–	–	Setup →
Signature	FOX 36 Factory (160 mm)	FOX Float X Factory	210x55	140 mm	–	–	Setup →
Staff Edition	FOX 38 Factory (160 mm)	FOX Float X2 Factory	210x55	140 mm	–	–	Setup →

How it compares

With 150–160 mm at the fork, the Commencal Meta TR V4 sits above average: across the 44 bikes in the “trail bike” category in our database, the median is 140 mm. Within Commencal’s mountain bikes, it sits between the Commencal Meta HT V3 and the Commencal Meta V5 on travel. The frame is made of aluminium.

For suspension, Commencal combines components from FOX, RockShox and Öhlins. In total, 8 different forks are used, from the FOX 36 Performance to the FOX 38 Factory. The Race build uses a coil shock (ROCKSHOX Super Deluxe Coil Ultimate), so SAG is set with the spring rate rather than air pressure.

Setup notes for this spec

Fork (FOX 36 Performance): air goes in through the valve on top of the left leg. After every change, compress the fork firmly a few times before measuring SAG.
Rebound: turn the red FOX and RockShox adjuster fully closed first and count clicks from there – that way you can note settings and restore them later.
Coil spring (ROCKSHOX Super Deluxe Coil Ultimate): if SAG is off, only a different spring rate will fix it. Preload should just keep the spring from rattling; more preload makes the shock less supple.
Air shock (FOX Float DPS Performance): measure SAG in your riding position, ideally with a helper holding the bike. Cycle the shock a few times after every pressure change.

Target SAG for the Commencal Meta TR V4

Instead of percentages, this table gives SAG directly in millimetres, measurable with the O-ring on the stanchion and on the shock shaft. Change the pressure step by step until you reach the value; if Commencal gives its own target SAG, use that.

150 mm fork, 55.0 mm shock stroke (Essential, Ohlins Edition, Origin, Ride)

Riding style	Fork SAG	Shock SAG
XC / touring	17 % = 26 mm	24 % = 13.2 mm on the shock shaft
Trail	20 % = 30 mm	28 % = 15.4 mm on the shock shaft
Enduro / rough	22 % = 33 mm	30 % = 16.5 mm on the shock shaft
Bike park	20 % = 30 mm	27 % = 14.9 mm on the shock shaft

160 mm fork, 55.0 mm shock stroke (Race, Ride 2025, Signature, Staff Edition)

Riding style	Fork SAG	Shock SAG
XC / touring	17 % = 27 mm	24 % = 13.2 mm on the shock shaft
Trail	20 % = 32 mm	28 % = 15.4 mm on the shock shaft
Enduro / rough	22 % = 35 mm	30 % = 16.5 mm on the shock shaft
Bike park	20 % = 32 mm	27 % = 14.9 mm on the shock shaft

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

The values apply to 2.40″ wide tubeless tyres with a trail casing. With an inner tube add about 0.2 bar (2.9 psi), with an insert take off about 0.1 bar (1.5 psi). Stock tyres: Rear: MAXXIS DHR II - Front: MAXXIS Assegai; Rear: MAXXIS Dissector - Front: MAXXIS DHR II; Rear: SCHWALBE Magic Mary - Front: SCHWALBE Magic Mary; Rear: SCHWALBE Nobby Nic - Front: SCHWALBE Magic Mary.

Ready-to-ride weight	Front	Rear
60 kg	1.43 bar (21 psi)	1.63 bar (24 psi)
70 kg	1.55 bar (22 psi)	1.75 bar (25 psi)
80 kg	1.67 bar (24 psi)	1.87 bar (27 psi)
90 kg	1.79 bar (26 psi)	1.99 bar (29 psi)
100 kg	1.91 bar (28 psi)	2.11 bar (31 psi)
110 kg	2.03 bar (29 psi)	2.23 bar (32 psi)
120 kg	2.15 bar (31 psi)	2.35 bar (34 psi)

Air pressure in the fork and shock

You will find a guide value for air pressure on the fork sticker (or on the shock) or in the suspension makers’ charts. Our calculator also takes riding style and rebound into account. In the end, measured SAG is what counts.

Note: no guarantee is given. Specs can vary by model year, size and country; the type plate, the manual and Commencal are authoritative. The maximum pressures of fork, shock, tyres and rims always apply.