Commencal T.E.M.P.O. Power: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 3 builds · Bike type: Full-suspension e-MTB

The Commencal T.E.M.P.O. Power is an e-MTB for trail and touring with 150 mm of fork travel and 135 mm at the rear. It is powered by BOSCH Performance Line SX. Here you will find all 3 current builds with fork, shock and shock size, plus matching SAG and tyre pressure starting values.

Calculate the setup for your Commencal T.E.M.P.O. Power →

All builds

Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, motor, weight and price according to the manufacturer. Wheel size: 29.

Build	Fork	Shock	Shock size	Rear travel	Motor	Weight	RRP	Calculator
Essential Eagle 90 2026	FOX 36 Performance E-Bike (150 mm)	FOX Float Performance	210x50	135 mm	BOSCH Performance Line SX 400 Wh	–	–	Setup →
Signature AXS 2025	FOX 36 Factory E-Bike (150 mm)	FOX Float Factory	210x50	135 mm	BOSCH Performance Line SX 400 Wh	–	–	Setup →
Signature Eagle 90 2026	FOX 36 Factory E-Bike (150 mm)	FOX Float Factory	210x50	135 mm	BOSCH Performance Line SX 400 Wh	–	–	Setup →

How it compares

150 mm at the fork almost exactly matches the 150 mm median of the 101 bikes in the “e-MTB for trail and touring” category in our database. The fork has 15 mm more travel than the rear end with 135 mm – a common layout that takes load off the front on steep terrain. Among Commencal’s e-mountain bikes, the Commencal T.E.M.P.O. Power has the shortest fork travel. The frame is made of aluminium.

Commencal uses FOX suspension throughout. The fork line-up ranges from the FOX 36 Performance E-Bike to the FOX 36 Factory E-Bike. Drive comes from BOSCH Performance Line SX, paired with 400 Wh of battery capacity.

Setup notes for this spec

Fork (FOX 36 Performance E-Bike): air goes in through the valve on top of the left leg. After every change, compress the fork firmly a few times before measuring SAG.
Rebound: on FOX suspension the rebound adjuster is red. Always count clicks from fully closed (clockwise to the stop) so you can return to any setting.
Shock (FOX Float Performance): get on the bike in your normal riding position, step off carefully and read the O-ring. Always cycle the shock a few times after pumping.
e-MTB: the extra weight mainly affects tyre pressure, which is why the table below already includes a surcharge. SAG is measured just as on a bike without a motor.

Target SAG for the Commencal T.E.M.P.O. Power

Instead of percentages, this table gives SAG directly in millimetres, measurable with the O-ring on the stanchion and on the shock shaft. Change the pressure step by step until you reach the value; if Commencal gives its own target SAG, use that.

150 mm fork, 50.0 mm shock stroke (all builds)

Riding style	Fork SAG	Shock SAG
XC / touring	17 % = 26 mm	24 % = 12.0 mm on the shock shaft
Trail	20 % = 30 mm	28 % = 14.0 mm on the shock shaft
Enduro / rough	22 % = 33 mm	30 % = 15.0 mm on the shock shaft
Bike park	20 % = 30 mm	27 % = 13.5 mm on the shock shaft

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

For 2.40″ wide tyres, tubeless with a trail casing, including the e-MTB surcharge. With an inner tube about 0.2 bar (2.9 psi) more, with an insert about 0.1 bar (1.5 psi) less. Stock tyres: Rear: MAXXIS DHRII - Front: MAXXIS Assegai; Rear: SCHWALBE Tacky Chan - Front: SCHWALBE Magic Mary.

Ready-to-ride weight	Front	Rear
60 kg	1.48 bar (21 psi)	1.68 bar (24 psi)
70 kg	1.60 bar (23 psi)	1.80 bar (26 psi)
80 kg	1.72 bar (25 psi)	1.92 bar (28 psi)
90 kg	1.84 bar (27 psi)	2.04 bar (30 psi)
100 kg	1.96 bar (28 psi)	2.16 bar (31 psi)
110 kg	2.08 bar (30 psi)	2.28 bar (33 psi)
120 kg	2.20 bar (32 psi)	2.40 bar (35 psi)

Air pressure in the fork and shock

The sticker on the fork (or on the shock) and the manufacturers’ setup charts give you a first pressure. Our calculator is more precise and suggests rebound too – always check the result via SAG.

Note: all values without guarantee. Specification can vary by model year, frame size and market – if in doubt, the type plate, the manual and Commencal’s information apply. Never exceed maximum pressures.