bikesetting

Giant Reign: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 3 builds · RRP €3,700 – €7,000 · Bike type: Full-suspension MTB

The Giant Reign is an enduro bike with 170–180 mm of fork travel and 160–165 mm at the rear. Below you will find all 3 current builds with fork, shock and shock size, plus SAG values in millimetres and a tyre pressure table.

Calculate the setup for your Giant Reign →

All builds

Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, weight and price according to the manufacturer. Wheel size: 29" / 27.5" (Mullet).

BuildForkShockShock sizeRear travelWeightRRPCalculator
ReignRockShox ZEB Delta RC (170 mm)RockShox Super Deluxe R205x62.5160 mm–€3,700Setup →
SERockShox ZEB Ultimate Charger (180 mm)RockShox Vivid Ultimate205x65165 mm–€5,200Setup →
AdvancedRockShox ZEB Ultimate Charger 3.2 RC (170 mm)RockShox Vivid Ultimate RCT2205x62.5160 mm15.4 kg€7,000Setup →

How it compares

170–180 mm at the fork almost exactly matches the 170 mm median of the 41 bikes in the “enduro bike” category in our database. Within Giant’s mountain bikes, it sits between the Giant Stance and the Giant Glory on travel. Depending on the build, the frame is aluminium or carbon.

At 15.4 kg (Advanced build), the weight is close to the category median of 15.7 kg. Entry costs €3,700 for the Reign build – less than the category median of €4,750. The top build, Advanced, costs €7,000. Fork and shock come from RockShox on every build. The fork line-up ranges from the RockShox ZEB Delta RC to the RockShox ZEB Ultimate Charger 3.2 RC.

Setup notes for this spec

Target SAG for the Giant Reign

The table converts the recommended SAG percentages into millimetres, so you can check them with the O-ring directly on the stanchion and on the shock shaft. Adjust the air pressure until the value is right. If Giant specifies its own target SAG for your model, that takes priority.

170 mm fork, 62.5 mm shock stroke (Reign, Advanced)

Riding styleFork SAGShock SAG
XC / touring17 % = 29 mm24 % = 15.0 mm on the shock shaft
Trail20 % = 34 mm28 % = 17.5 mm on the shock shaft
Enduro / rough22 % = 37 mm30 % = 18.8 mm on the shock shaft
Bike park20 % = 34 mm27 % = 16.9 mm on the shock shaft

180 mm fork, 65.0 mm shock stroke (SE)

Riding styleFork SAGShock SAG
XC / touring17 % = 31 mm24 % = 15.6 mm on the shock shaft
Trail20 % = 36 mm28 % = 18.2 mm on the shock shaft
Enduro / rough22 % = 40 mm30 % = 19.5 mm on the shock shaft
Bike park20 % = 36 mm27 % = 17.6 mm on the shock shaft

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

For 2.50″ wide tyres, tubeless with a trail casing. With an inner tube about 0.2 bar (2.9 psi) more, with an insert about 0.1 bar (1.5 psi) less. Stock tyres: Maxxis Assegai 29x2.5 / Minion DHR II 27.5x2.4.

Ready-to-ride weightFrontRear
60 kg1.43 bar (21 psi)1.63 bar (24 psi)
70 kg1.55 bar (22 psi)1.75 bar (25 psi)
80 kg1.67 bar (24 psi)1.87 bar (27 psi)
90 kg1.79 bar (26 psi)1.99 bar (29 psi)
100 kg1.91 bar (28 psi)2.11 bar (31 psi)
110 kg2.03 bar (29 psi)2.23 bar (32 psi)
120 kg2.15 bar (31 psi)2.35 bar (34 psi)

Air pressure in the fork and shock

The sticker on the fork (or on the shock) and the manufacturers’ setup charts give you a first pressure. Our calculator is more precise and suggests rebound too – always check the result via SAG.

Note: all information without guarantee. Specs can differ by model year, frame size and market – the type plate, the owner’s manual and Giant’s information are authoritative. Never exceed the maximum pressures of fork, shock, tyres and rims.

Sources

More Giant bikes