bikesetting

Pivot Mach 4 SL: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 5 builds · Bike type: Full-suspension MTB

The Pivot Mach 4 SL is a cross-country full-suspension bike with 120 mm of fork travel and 120 mm at the rear. This page lists the 5 current builds with fork, shock and shock size and gives matching starting values for SAG and tyre pressure.

Calculate the setup for your Pivot Mach 4 SL →

All builds

Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, weight and price according to the manufacturer. Wheel size: 29.

BuildForkShockShock sizeRear travelWeightRRPCalculator
Expert XT Di2Fox Performance 34SL (120 mm)Fox Performance Float–120 mm––Setup →
Pro X0 Eagle TransmissionFox Factory 34SL (120 mm)Fox Factory Float–120 mm––Setup →
Ride Eagle 70/90Fox Performance 34SL (120 mm)Fox Performance Float–120 mm––Setup →
Team XX Eagle TransmissionFox Factory 34SL (120 mm)Fox Factory Float–120 mm––Setup →
Team XX Eagle Transmission | Flight AttendantRock Shox SID Ultimate Flight Attendant (120 mm)Rock Shox SIDLuxe Ultimate Flight Attendant–120 mm––Setup →

How it compares

120 mm at the fork almost exactly matches the 120 mm median of the 23 bikes in the “cross-country full-suspension bike” category in our database. Travel is the same front and rear at 120 mm each. Among Pivot’s mountain bikes, the Pivot Mach 4 SL has the shortest fork travel. The frame is made of carbon.

For suspension, Pivot combines components from FOX and RockShox. The fork line-up ranges from the Fox Performance 34SL to the Rock Shox SID Ultimate Flight Attendant.

Setup notes for this spec

Target SAG for the Pivot Mach 4 SL

The table converts the recommended SAG percentages into millimetres, so you can check them with the O-ring directly on the stanchion and on the shock shaft. Adjust the air pressure until the value is right. If Pivot specifies its own target SAG for your model, that takes priority.

120 mm fork (all builds)

Riding styleFork SAG
XC / touring17 % = 20 mm
Trail20 % = 24 mm
Enduro / rough22 % = 26 mm
Bike park20 % = 24 mm

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

Basis: 2.40″ tyre width, tubeless, trail casing. If you run tubes, add about 0.2 bar (2.9 psi); with an insert, about 0.1 bar (1.5 psi) less is enough. Stock tyres: MAXXIS REKON 29X2.4 3C TR EXO 120TPI Maxxis Rekon Race 29" x 2.4" TR, EXO, 120 TPI; Maxxis Ardent Race 29" x 2.2" TR, EXO, 120 TPI Maxxis Ardent Race 29" x 2.2" TR, EXO, 120 TPI; Maxxis Rekon 29X2.4 3C TR, EXO, 120TPI Maxxis Rekon Race 29" x 2.4" TR, EXO, 120 TPI.

Ready-to-ride weightFrontRear
60 kg1.43 bar (21 psi)1.63 bar (24 psi)
70 kg1.55 bar (22 psi)1.75 bar (25 psi)
80 kg1.67 bar (24 psi)1.87 bar (27 psi)
90 kg1.79 bar (26 psi)1.99 bar (29 psi)
100 kg1.91 bar (28 psi)2.11 bar (31 psi)
110 kg2.03 bar (29 psi)2.23 bar (32 psi)
120 kg2.15 bar (31 psi)2.35 bar (34 psi)

Air pressure in the fork and shock

You will find a guide value for air pressure on the fork sticker (or on the shock) or in the suspension makers’ charts. Our calculator also takes riding style and rebound into account. In the end, measured SAG is what counts.

Note: all values without guarantee. Specification can vary by model year, frame size and market – if in doubt, the type plate, the manual and Pivot’s information apply. Never exceed maximum pressures.

Sources

More Pivot bikes