bikesetting

Vitus Mythique: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 6 builds · Bike type: Full-suspension MTB

The Vitus Mythique is a trail bike with 130–140 mm of fork travel and 130–140 mm at the rear. Below you will find all 6 current builds with fork, shock and shock size, plus SAG values in millimetres and a tyre pressure table.

Calculate the setup for your Vitus Mythique →

All builds

Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, weight and price according to the manufacturer. Wheel size: 27.5 / 29.

BuildForkShockShock sizeRear travelWeightRRPCalculator
MythiqueRockShox Reckon Silver RL (140 mm)RockShox Deluxe Select185x55140 mm––Setup →
27 VRX-Fusion RC32 Boost (130 mm)X-Fusion O2 Pro R185x50130 mm––Setup →
27 VRSRockShox 35 Silver TK (140 mm)RockShox Deluxe Select R185x55140 mm––Setup →
27 VRXMarzocchi Bomber Z2 (140 mm)RockShox Deluxe Select R185x55140 mm––Setup →
29 AMPRockShox Pike Select RC (140 mm)RockShox Deluxe Select R185x55140 mm––Setup →
29 VRSRockShox 35 Silver TK (140 mm)RockShox Deluxe Select R185x55140 mm––Setup →

How it compares

On travel, the Vitus Mythique is right where the “trail bike” category usually is: 130–140 mm up front against a median of 140 mm from 44 bikes. On travel, it slots in between the Vitus Sentier and the Vitus Escarpe in the Vitus range. The frame is made of aluminium.

Depending on the build, fork and shock come from Marzocchi, RockShox and X-Fusion. The fork line-up ranges from the RockShox Reckon Silver RL to the RockShox Pike Select RC. Depending on build or size, the wheels are 27.5 / 29.

Setup notes for this spec

Target SAG for the Vitus Mythique

The table converts the recommended SAG percentages into millimetres, so you can check them with the O-ring directly on the stanchion and on the shock shaft. Adjust the air pressure until the value is right. If Vitus specifies its own target SAG for your model, that takes priority.

140 mm fork, 55.0 mm shock stroke (Mythique, 27 VRS, 27 VRX, 29 AMP, 29 VRS)

Riding styleFork SAGShock SAG
XC / touring17 % = 24 mm24 % = 13.2 mm on the shock shaft
Trail20 % = 28 mm28 % = 15.4 mm on the shock shaft
Enduro / rough22 % = 31 mm30 % = 16.5 mm on the shock shaft
Bike park20 % = 28 mm27 % = 14.9 mm on the shock shaft

130 mm fork, 50.0 mm shock stroke (27 VR)

Riding styleFork SAGShock SAG
XC / touring17 % = 22 mm24 % = 12.0 mm on the shock shaft
Trail20 % = 26 mm28 % = 14.0 mm on the shock shaft
Enduro / rough22 % = 29 mm30 % = 15.0 mm on the shock shaft
Bike park20 % = 26 mm27 % = 13.5 mm on the shock shaft

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

For 2.30″ wide tyres, tubeless with a trail casing. With an inner tube about 0.2 bar (2.9 psi) more, with an insert about 0.1 bar (1.5 psi) less. Stock tyres: Maxxis High Roller II / Maxxis High Roller II; Maxxis Minion DHF / Maxxis Forekaster; Schwalbe Magic Mary / Schwalbe Hans Dampf.

Ready-to-ride weightFrontRear
60 kg1.53 bar (22 psi)1.73 bar (25 psi)
70 kg1.65 bar (24 psi)1.85 bar (27 psi)
80 kg1.77 bar (26 psi)1.97 bar (29 psi)
90 kg1.89 bar (27 psi)2.09 bar (30 psi)
100 kg2.01 bar (29 psi)2.21 bar (32 psi)
110 kg2.13 bar (31 psi)2.33 bar (34 psi)
120 kg2.25 bar (33 psi)2.45 bar (36 psi)

Air pressure in the fork and shock

You will find a guide value for air pressure on the fork sticker (or on the shock) or in the suspension makers’ charts. Our calculator also takes riding style and rebound into account. In the end, measured SAG is what counts.

Note: all information without guarantee. Specs can differ by model year, frame size and market – the type plate, the owner’s manual and Vitus’s information are authoritative. Never exceed the maximum pressures of fork, shock, tyres and rims.

Sources

More Vitus bikes