bikesetting

Vitus Sommet: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 7 builds · Bike type: Full-suspension MTB

The Vitus Sommet is an enduro bike with 170 mm of fork travel and 162–170 mm at the rear. Here you will find all 7 current builds with fork, shock and shock size, plus matching SAG and tyre pressure starting values.

Calculate the setup for your Vitus Sommet →

All builds

Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, weight and price according to the manufacturer. Wheel size: 29 / MX.

BuildForkShockShock sizeRear travelWeightRRPCalculator
290 CRRockShox Domain RC (170 mm)RockShox Super Deluxe Select R205x62.5162 mm––Setup →
290 CRSRockShox Zeb Select RC (170 mm)RockShox Super Deluxe Select+ RT205x62.5162 mm––Setup →
290 CRXFOX 38 Float EVOL Factory Series (170 mm)FOX Float X2 Factory Series205x62.5162 mm––Setup →
297 AMPRockShox Zeb Ultimate (170 mm)RockShox Super Deluxe Ultimate205x65170 mm––Setup →
297 CRRockShox Domain RC (170 mm)RockShox Super Deluxe Select R205x65170 mm––Setup →
297 CRSRockShox Zeb Select RC (170 mm)RockShox Super Deluxe Select+ RT205x65170 mm––Setup →
297 CRXFOX 38 Float EVOL Factory Series (170 mm)FOX Float X2 Factory Series205x65170 mm––Setup →

How it compares

On travel, the Vitus Sommet is right where the “enduro bike” category usually is: 170 mm up front against a median of 170 mm from 41 bikes. On travel, it slots in between the Vitus Escarpe and the Vitus Dominer in the Vitus range. The frame is made of carbon.

For suspension, Vitus combines components from FOX and RockShox. The fork line-up ranges from the RockShox Domain RC to the RockShox Zeb Ultimate. Wheel sizes differ by build or frame size: 29 / MX.

Setup notes for this spec

Target SAG for the Vitus Sommet

Instead of percentages, this table gives SAG directly in millimetres, measurable with the O-ring on the stanchion and on the shock shaft. Change the pressure step by step until you reach the value; if Vitus gives its own target SAG, use that.

170 mm fork, 62.5 mm shock stroke (290 CR, 290 CRS, 290 CRX)

Riding styleFork SAGShock SAG
XC / touring17 % = 29 mm24 % = 15.0 mm on the shock shaft
Trail20 % = 34 mm28 % = 17.5 mm on the shock shaft
Enduro / rough22 % = 37 mm30 % = 18.8 mm on the shock shaft
Bike park20 % = 34 mm27 % = 16.9 mm on the shock shaft

170 mm fork, 65.0 mm shock stroke (297 AMP, 297 CR, 297 CRS, 297 CRX)

Riding styleFork SAGShock SAG
XC / touring17 % = 29 mm24 % = 15.6 mm on the shock shaft
Trail20 % = 34 mm28 % = 18.2 mm on the shock shaft
Enduro / rough22 % = 37 mm30 % = 19.5 mm on the shock shaft
Bike park20 % = 34 mm27 % = 17.6 mm on the shock shaft

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

For 2.50″ wide tyres, tubeless with a trail casing. With an inner tube about 0.2 bar (2.9 psi) more, with an insert about 0.1 bar (1.5 psi) less. Stock tyres: Maxxis Assegai / Maxxis Minion DHR II.

Ready-to-ride weightFrontRear
60 kg1.43 bar (21 psi)1.63 bar (24 psi)
70 kg1.55 bar (22 psi)1.75 bar (25 psi)
80 kg1.67 bar (24 psi)1.87 bar (27 psi)
90 kg1.79 bar (26 psi)1.99 bar (29 psi)
100 kg1.91 bar (28 psi)2.11 bar (31 psi)
110 kg2.03 bar (29 psi)2.23 bar (32 psi)
120 kg2.15 bar (31 psi)2.35 bar (34 psi)

Air pressure in the fork and shock

You will find a guide value for air pressure on the fork sticker (or on the shock) or in the suspension makers’ charts. Our calculator also takes riding style and rebound into account. In the end, measured SAG is what counts.

Note: all values without guarantee. Specification can vary by model year, frame size and market – if in doubt, the type plate, the manual and Vitus’s information apply. Never exceed maximum pressures.

Sources

More Vitus bikes