bikesetting

Canyon Neuron:ON: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 3 builds · RRP €3,999 – €5,499 · Bike type: Full-suspension e-MTB

The Canyon Neuron:ON is an e-MTB for trail and touring with 150 mm of fork travel and 145 mm at the rear. It is powered by Bosch Performance Line CX or Bosch Performance Line PX. This page lists the 3 current builds with fork, shock and shock size and gives matching starting values for SAG and tyre pressure.

Calculate the setup for your Canyon Neuron:ON →

All builds

Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, motor, weight and price according to the manufacturer. Wheel size: 29 / 29 (XS–S: 27.5).

BuildForkShockShock sizeRear travelMotorWeightRRPCalculator
7RockShox Psylo Silver RC (150 mm)RockShox Deluxe Select210x55145 mmBosch Performance Line PX
800 Wh
26.5 kg€3,999Setup →
AL 8FOX 36 Rhythm (150 mm)FOX Float DPS Performance210x55–Bosch Performance Line CX
800 Wh
25.6 kg€4,499Setup →
9 AXSFOX 36 Performance (150 mm)FOX Float Rhythm210x55145 mmBosch Performance Line CX
800 Wh
25.9 kg€5,499Setup →

How it compares

On travel, the Canyon Neuron:ON is right where the “e-MTB for trail and touring” category usually is: 150 mm up front against a median of 150 mm from 101 bikes. The rear offers 145 mm, 5 mm less than the front. On travel, it slots in between the Canyon Neuron:ONfly and the Canyon Spectral:ON in the Canyon range. The frame is made of aluminium.

At a minimum of 25.6 kg (AL 8 build), the Canyon Neuron:ON is heavier than its category median of 23.4 kg – 2.2 kg more. There are 0.9 kg between the lightest and the heaviest build. Prices for the Canyon Neuron:ON start at €3,999 (7), below the category median of €5,500. The top build, 9 AXS, costs €5,499. Depending on the build, fork and shock come from FOX and RockShox. In total, 3 different forks are used, from the RockShox Psylo Silver RC to the FOX 36 Performance. It is powered by Bosch Performance Line PX or Bosch Performance Line CX with a 800 Wh battery.

Setup notes for this spec

Target SAG for the Canyon Neuron:ON

Instead of percentages, this table gives SAG directly in millimetres, measurable with the O-ring on the stanchion and on the shock shaft. Change the pressure step by step until you reach the value; if Canyon gives its own target SAG, use that.

150 mm fork, 55.0 mm shock stroke (all builds)

Riding styleFork SAGShock SAG
XC / touring17 % = 26 mm24 % = 13.2 mm on the shock shaft
Trail20 % = 30 mm28 % = 15.4 mm on the shock shaft
Enduro / rough22 % = 33 mm30 % = 16.5 mm on the shock shaft
Bike park20 % = 30 mm27 % = 14.9 mm on the shock shaft

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

Basis: 2.50″ tyre width, tubeless, trail casing, including the e-MTB surcharge. If you run tubes, add about 0.2 bar (2.9 psi); with an insert, about 0.1 bar (1.5 psi) less is enough. Stock tyres: Schwalbe Magic Mary 2.4 / Hans Dampf 2.35; Schwalbe Romy Trail 2.5; Schwalbe Romy Trail Pro Radial 2.5.

Ready-to-ride weightFrontRear
60 kg1.48 bar (21 psi)1.68 bar (24 psi)
70 kg1.60 bar (23 psi)1.80 bar (26 psi)
80 kg1.72 bar (25 psi)1.92 bar (28 psi)
90 kg1.84 bar (27 psi)2.04 bar (30 psi)
100 kg1.96 bar (28 psi)2.16 bar (31 psi)
110 kg2.08 bar (30 psi)2.28 bar (33 psi)
120 kg2.20 bar (32 psi)2.40 bar (35 psi)

Air pressure in the fork and shock

The sticker on the fork (or on the shock) and the manufacturers’ setup charts give you a first pressure. Our calculator is more precise and suggests rebound too – always check the result via SAG.

Note: all values without guarantee. Specification can vary by model year, frame size and market – if in doubt, the type plate, the manual and Canyon’s information apply. Never exceed maximum pressures.

Sources

More Canyon bikes