bikesetting

Canyon Neuron: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 3 builds · RRP €1,999 – €2,999 · Bike type: Full-suspension MTB

The Canyon Neuron is a trail bike with 140 mm of fork travel and 130 mm at the rear. This page lists the 3 current builds with fork, shock and shock size and gives matching starting values for SAG and tyre pressure.

Calculate the setup for your Canyon Neuron →

All builds

Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, weight and price according to the manufacturer. Wheel size: 29 (XS–S: 27.5).

BuildForkShockShock sizeRear travelWeightRRPCalculator
5RockShox Recon Silver RL (140 mm)RockShox Deluxe Select+210x50130 mm15.2 kg€1,999Setup →
6FOX 34 Rhythm (140 mm)FOX Float Rhythm210x50130 mm14.4 kg€2,499Setup →
7FOX 36 SL Performance (140 mm)FOX Float Performance210x50130 mm14.1 kg€2,999Setup →

How it compares

140 mm at the fork almost exactly matches the 140 mm median of the 44 bikes in the “trail bike” category in our database. The rear offers 130 mm, 10 mm less than the front. Within Canyon’s mountain bikes, it sits between the Canyon Neuron Young Hero and the Canyon Spectral on travel. Canyon builds the frame from aluminium.

At 14.1 kg (7 build), the weight is close to the category median of 13.9 kg. Within the range, weight varies by 1.1 kg. Entry costs €1,999 for the 5 build – less than the category median of €3,000. For the 7 build, Canyon asks €2,999. For suspension, Canyon combines components from FOX and RockShox. In total, 3 different forks are used, from the RockShox Recon Silver RL to the FOX 36 SL Performance.

Setup notes for this spec

Target SAG for the Canyon Neuron

The table converts the recommended SAG percentages into millimetres, so you can check them with the O-ring directly on the stanchion and on the shock shaft. Adjust the air pressure until the value is right. If Canyon specifies its own target SAG for your model, that takes priority.

140 mm fork, 50.0 mm shock stroke (all builds)

Riding styleFork SAGShock SAG
XC / touring17 % = 24 mm24 % = 12.0 mm on the shock shaft
Trail20 % = 28 mm28 % = 14.0 mm on the shock shaft
Enduro / rough22 % = 31 mm30 % = 15.0 mm on the shock shaft
Bike park20 % = 28 mm27 % = 13.5 mm on the shock shaft

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

For 2.40″ wide tyres, tubeless with a trail casing. With an inner tube about 0.2 bar (2.9 psi) more, with an insert about 0.1 bar (1.5 psi) less. Stock tyres: Schwalbe Wicked Will / Nobby Nic 2.4.

Ready-to-ride weightFrontRear
60 kg1.43 bar (21 psi)1.63 bar (24 psi)
70 kg1.55 bar (22 psi)1.75 bar (25 psi)
80 kg1.67 bar (24 psi)1.87 bar (27 psi)
90 kg1.79 bar (26 psi)1.99 bar (29 psi)
100 kg1.91 bar (28 psi)2.11 bar (31 psi)
110 kg2.03 bar (29 psi)2.23 bar (32 psi)
120 kg2.15 bar (31 psi)2.35 bar (34 psi)

Air pressure in the fork and shock

The sticker on the fork (or on the shock) and the manufacturers’ setup charts give you a first pressure. Our calculator is more precise and suggests rebound too – always check the result via SAG.

Note: all information without guarantee. Specs can differ by model year, frame size and market – the type plate, the owner’s manual and Canyon’s information are authoritative. Never exceed the maximum pressures of fork, shock, tyres and rims.

Sources

More Canyon bikes