bikesetting

Canyon Lux World Cup: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 5 builds · RRP €3,999 – €7,999 · Bike type: Full-suspension MTB

The Canyon Lux World Cup is a cross-country full-suspension bike with 120 mm of fork travel and 110 mm at the rear. Here you will find all 5 current builds with fork, shock and shock size, plus matching SAG and tyre pressure starting values.

Calculate the setup for your Canyon Lux World Cup →

All builds

Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, weight and price according to the manufacturer. Wheel size: 29.

BuildForkShockShock sizeRear travelWeightRRPCalculator
CF 9RockShox SID Select+ 3-Position Remote (120 mm)RockShox SIDLuxe Select+ 3-Position Remote210x50110 mm11.5 kg€3,999Setup →
CFR XT Di2FOX 34 SL Performance Elite (120 mm)FOX Float SL Performance Elite210x50110 mm11.1 kg€4,999Setup →
CFR X0 AXSRockShox SID Select+ 3-Position Remote (120 mm)RockShox SIDLuxe Select+ 3-Position Remote210x50110 mm11.0 kg€5,999Setup →
CFR XX SL AXSRockShox SID Ultimate 3-Position Remote (120 mm)RockShox SIDLuxe Ultimate 3-Position Remote210x50110 mm10.5 kg€7,499Setup →
CFR XTR Di2FOX 34 SL Factory (120 mm)FOX Float SL Factory 3-Pos Remote210x50110 mm9.8 kg€7,999Setup →

How it compares

On travel, the Canyon Lux World Cup is right where the “cross-country full-suspension bike” category usually is: 120 mm up front against a median of 120 mm from 23 bikes. The rear offers 110 mm, 10 mm less than the front. Within Canyon’s mountain bikes, it sits between the Canyon Stitched and the Canyon Neuron Young Hero on travel. Canyon builds the frame from carbon.

The Canyon Lux World Cup does well on weight: 9.8 kg for the CFR XTR Di2 build is 1.0 kg below the median of comparable bikes (10.8 kg). Within the range, weight varies by 1.7 kg. At €3,999 for the CF 9 build, pricing is typical for the category (median €4,350). For the CFR XTR Di2 build, Canyon asks €7,999. Depending on the build, fork and shock come from FOX and RockShox. In total, 4 different forks are used, from the RockShox SID Select+ 3-Position Remote to the FOX 34 SL Factory.

Setup notes for this spec

Target SAG for the Canyon Lux World Cup

The table converts the recommended SAG percentages into millimetres, so you can check them with the O-ring directly on the stanchion and on the shock shaft. Adjust the air pressure until the value is right. If Canyon specifies its own target SAG for your model, that takes priority.

120 mm fork, 50.0 mm shock stroke (all builds)

Riding styleFork SAGShock SAG
XC / touring17 % = 20 mm24 % = 12.0 mm on the shock shaft
Trail20 % = 24 mm28 % = 14.0 mm on the shock shaft
Enduro / rough22 % = 26 mm30 % = 15.0 mm on the shock shaft
Bike park20 % = 24 mm27 % = 13.5 mm on the shock shaft

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

The values apply to 2.35″ wide tubeless tyres with a trail casing. With an inner tube add about 0.2 bar (2.9 psi), with an insert take off about 0.1 bar (1.5 psi). Stock tyres: Pirelli Scorpion XC RC Race Lite 2.4; Schwalbe Racing Ray / Racing Ralph 2.35; Schwalbe Rick XC Pro 2.4.

Ready-to-ride weightFrontRear
60 kg1.43 bar (21 psi)1.63 bar (24 psi)
70 kg1.55 bar (22 psi)1.75 bar (25 psi)
80 kg1.67 bar (24 psi)1.87 bar (27 psi)
90 kg1.79 bar (26 psi)1.99 bar (29 psi)
100 kg1.91 bar (28 psi)2.11 bar (31 psi)
110 kg2.03 bar (29 psi)2.23 bar (32 psi)
120 kg2.15 bar (31 psi)2.35 bar (34 psi)

Air pressure in the fork and shock

The sticker on the fork (or on the shock) and the manufacturers’ setup charts give you a first pressure. Our calculator is more precise and suggests rebound too – always check the result via SAG.

Note: all information without guarantee. Specs can differ by model year, frame size and market – the type plate, the owner’s manual and Canyon’s information are authoritative. Never exceed the maximum pressures of fork, shock, tyres and rims.

Sources

More Canyon bikes