Canyon Stitched: suspension setup & specs
The Canyon Stitched is a dirt jump bike with 100 mm of fork travel. Below you will find all 3 current builds with fork, plus SAG values in millimetres and a tyre pressure table.
Calculate the setup for your Canyon Stitched →
All builds
Fork, weight and price according to the manufacturer. Wheel size: 26.
| Build | Fork | Weight | RRP | Calculator |
|---|---|---|---|---|
| 360 | Manitou Circus Sport (100 mm) | 12.2 kg | €999 | Setup → |
| 360 CLLCTV | RockShox Pike DJ | – | €1,499 | Setup → |
| CFR Trial | RockShox Pike DJ | – | €2,499 | Setup → |
How it compares
On travel, the Canyon Stitched is right where the “dirt jump bike” category usually is: 100 mm up front against a median of 100 mm from 10 bikes. Among Canyon’s mountain bikes, the Canyon Stitched has the shortest fork travel. Depending on the build, the frame is aluminium or carbon.
Canyon gives a weight of 12.2 kg for the 360 build. Entry costs €999 for the 360 build – less than the category median of €1,700. For the CFR Trial build, Canyon asks €2,499. In total, 2 different forks are used, from the Manitou Circus Sport to the RockShox Pike DJ.
Setup notes for this spec
- Air fork (RockShox Pike DJ): the air valve is on top of the left leg under a cap. Change pressure in small steps (about 5 psi (0.34 bar)) and cycle the fork a few times afterwards so the air chambers can equalise.
- Rebound: on RockShox suspension the rebound adjuster is red. Always count clicks from fully closed (clockwise to the stop) so you can return to any setting.
- Hardtail: without rear suspension, rear tyre pressure largely decides comfort and traction – it is worth testing in 0.1 bar (1.5 psi) steps.
Target SAG for the Canyon Stitched
SAG is the share of travel your weight already uses in the riding position. The table gives it straight in millimetres – read the O-ring on the stanchion and adjust the air pressure until it matches. Any figures from Canyon take priority.
100 mm fork (360)
| Riding style | Fork SAG |
|---|---|
| XC / touring | 17 % = 17 mm |
| Trail | 20 % = 20 mm |
| Enduro / rough | 22 % = 22 mm |
| Bike park | 20 % = 20 mm |
How to measure SAG is explained in our guide SAG setup.
Tyre pressure starting values
Basis: 2.40″ tyre width, tubeless, trail casing. If you run tubes, add about 0.2 bar (2.9 psi); with an insert, about 0.1 bar (1.5 psi) less is enough.
| Ready-to-ride weight | Front | Rear |
|---|---|---|
| 60 kg | 1.43 bar (21 psi) | 1.63 bar (24 psi) |
| 70 kg | 1.55 bar (22 psi) | 1.75 bar (25 psi) |
| 80 kg | 1.67 bar (24 psi) | 1.87 bar (27 psi) |
| 90 kg | 1.79 bar (26 psi) | 1.99 bar (29 psi) |
| 100 kg | 1.91 bar (28 psi) | 2.11 bar (31 psi) |
| 110 kg | 2.03 bar (29 psi) | 2.23 bar (32 psi) |
| 120 kg | 2.15 bar (31 psi) | 2.35 bar (34 psi) |
Air pressure in the fork
You will find a guide value for air pressure on the fork sticker or in the suspension makers’ charts. Our calculator also takes riding style and rebound into account. In the end, measured SAG is what counts.