Orbea Oiz: suspension setup & specs
The Orbea Oiz is a cross-country full-suspension bike with 120 mm of fork travel and 120 mm at the rear. This page lists the 10 current builds with fork, shock and shock size and gives matching starting values for SAG and tyre pressure.
Calculate the setup for your Orbea Oiz →
All builds
Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, weight and price according to the manufacturer. Wheel size: 29.
| Build | Fork | Shock | Shock size | Rear travel | Weight | RRP | Calculator |
|---|---|---|---|---|---|---|---|
| H30 | Check manually (120 mm) | FOX Float DPS Performance | – | 120 mm | – | €2,499 | Setup → |
| H10 | Check manually (120 mm) | FOX Float DPS Performance | – | 120 mm | – | €2,999 | Setup → |
| M30 | Check manually (120 mm) | RockShox SIDLuxe Select+ | – | 120 mm | – | €3,799 | Setup → |
| M20 | Check manually (120 mm) | FOX Float SL Factory Kashima | – | 120 mm | – | €4,799 | Setup → |
| M10 | Check manually (120 mm) | FOX Float SL Factory Kashima | – | 120 mm | – | €5,999 | Setup → |
| M10 AXS | Check manually (120 mm) | RockShox SIDLuxe Ultimate Flight Attendant | – | 120 mm | – | €6,999 | Setup → |
| M-PRO | Check manually (120 mm) | FOX Float SL Factory Kashima | – | 120 mm | – | €7,299 | Setup → |
| M-Team AXS | Check manually (120 mm) | FOX Float SL Factory Kashima | – | 120 mm | – | €7,499 | Setup → |
| M-Team Factory | Check manually (120 mm) | FOX Float SL Factory Kashima | – | 120 mm | – | €9,499 | Setup → |
| M-LTD | Check manually (120 mm) | FOX Float SL Factory Kashima | – | 120 mm | – | €10,999 | Setup → |
How it compares
On travel, the Orbea Oiz is right where the “cross-country full-suspension bike” category usually is: 120 mm up front against a median of 120 mm from 23 bikes. Travel is the same front and rear at 120 mm each. On travel, it slots in between the Orbea Alma and the Orbea Occam SL in the Orbea range.
Entry costs €2,499 for the H30 build – less than the category median of €4,350. The top build, M-LTD, costs €10,999.
Setup notes for this spec
- Rebound: turn the red FOX and RockShox adjuster fully closed first and count clicks from there – that way you can note settings and restore them later.
- Air shock (FOX Float DPS Performance): measure SAG in your riding position, ideally with a helper holding the bike. Cycle the shock a few times after every pressure change.
Target SAG for the Orbea Oiz
SAG is the share of travel your weight already uses in the riding position. The table gives it straight in millimetres – read the O-ring on the stanchion and on the shock shaft and adjust the air pressure until it matches. Any figures from Orbea take priority.
120 mm fork (all builds)
| Riding style | Fork SAG |
|---|---|
| XC / touring | 17 % = 20 mm |
| Trail | 20 % = 24 mm |
| Enduro / rough | 22 % = 26 mm |
| Bike park | 20 % = 24 mm |
How to measure SAG is explained in our guide SAG setup.
Tyre pressure starting values
For 2.40″ wide tyres, tubeless with a trail casing. With an inner tube about 0.2 bar (2.9 psi) more, with an insert about 0.1 bar (1.5 psi) less.
| Ready-to-ride weight | Front | Rear |
|---|---|---|
| 60 kg | 1.43 bar (21 psi) | 1.63 bar (24 psi) |
| 70 kg | 1.55 bar (22 psi) | 1.75 bar (25 psi) |
| 80 kg | 1.67 bar (24 psi) | 1.87 bar (27 psi) |
| 90 kg | 1.79 bar (26 psi) | 1.99 bar (29 psi) |
| 100 kg | 1.91 bar (28 psi) | 2.11 bar (31 psi) |
| 110 kg | 2.03 bar (29 psi) | 2.23 bar (32 psi) |
| 120 kg | 2.15 bar (31 psi) | 2.35 bar (34 psi) |
Air pressure in the fork and shock
You will find a suitable starting pressure on the sticker on the fork stanchion (or on the shock) or in the suspension manufacturers’ setup charts. Our calculator gives you a starting value including rebound for your weight and riding style. What matters afterwards is the measured SAG from the table above.