bikesetting

Orbea Wild TR: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 5 builds · RRP €4,999 – €9,999 · Bike type: Full-suspension e-MTB

The Orbea Wild TR is an e-MTB for trail and touring with 150 mm of fork travel and 150 mm at the rear. It is powered by Bosch Performance Line CX. Below you will find all 5 current builds with fork, shock and shock size, plus SAG values in millimetres and a tyre pressure table.

Calculate the setup for your Orbea Wild TR →

All builds

Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, motor, weight and price according to the manufacturer. Wheel size: 29.

BuildForkShockShock sizeRear travelMotorWeightRRPCalculator
H20RockShox Psylo RC (150 mm)FOX Float Performance–150 mmBosch Performance Line CX
750 Wh
–€4,999Setup →
H10FOX 36 Float Performance (150 mm)FOX Float Performance–150 mmBosch Performance Line CX
750 Wh
–€5,999Setup →
M20FOX 36 Float Performance GRIP X (150 mm)FOX Float X Factory–150 mmBosch Performance Line CX
750 Wh
–€6,999Setup →
M10FOX 36 Float Factory GRIP X2 (150 mm)FOX Float X Factory–150 mmBosch Performance Line CX
750 Wh
–€8,499Setup →
M-TEAMFOX 36 Float Factory GRIP X2 (150 mm)FOX Float X Factory–150 mmBosch Performance Line CX
750 Wh
–€9,999Setup →

How it compares

On travel, the Orbea Wild TR is right where the “e-MTB for trail and touring” category usually is: 150 mm up front against a median of 150 mm from 101 bikes. Travel is the same front and rear at 150 mm each. No other Orbea model among its e-mountain bikes has more travel up front.

At €4,999 for the H20 build, pricing is typical for the category (median €5,500). For the M-TEAM build, Orbea asks €9,999. For suspension, Orbea combines components from FOX and RockShox. The fork line-up ranges from the RockShox Psylo RC to the FOX 36 Float Factory GRIP X2. Drive comes from Bosch Performance Line CX, paired with 750 Wh of battery capacity.

Setup notes for this spec

Target SAG for the Orbea Wild TR

SAG is the share of travel your weight already uses in the riding position. The table gives it straight in millimetres – read the O-ring on the stanchion and on the shock shaft and adjust the air pressure until it matches. Any figures from Orbea take priority.

150 mm fork (all builds)

Riding styleFork SAG
XC / touring17 % = 26 mm
Trail20 % = 30 mm
Enduro / rough22 % = 33 mm
Bike park20 % = 30 mm

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

The values apply to 2.60″ wide tubeless tyres with a trail casing, including the e-MTB surcharge. With an inner tube add about 0.2 bar (2.9 psi), with an insert take off about 0.1 bar (1.5 psi).

Ready-to-ride weightFrontRear
60 kg1.40 bar (20 psi)1.60 bar (23 psi)
70 kg1.52 bar (22 psi)1.72 bar (25 psi)
80 kg1.64 bar (24 psi)1.84 bar (27 psi)
90 kg1.76 bar (26 psi)1.96 bar (28 psi)
100 kg1.88 bar (27 psi)2.08 bar (30 psi)
110 kg2.00 bar (29 psi)2.20 bar (32 psi)
120 kg2.12 bar (31 psi)2.32 bar (34 psi)

Air pressure in the fork and shock

You will find a guide value for air pressure on the fork sticker (or on the shock) or in the suspension makers’ charts. Our calculator also takes riding style and rebound into account. In the end, measured SAG is what counts.

Note: all values without guarantee. Specification can vary by model year, frame size and market – if in doubt, the type plate, the manual and Orbea’s information apply. Never exceed maximum pressures.

Sources

More Orbea bikes