bikesetting

Trek Supercaliber: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 7 builds · RRP €3,999 – €13,999 · Bike type: Full-suspension MTB

The Trek Supercaliber is a cross-country full-suspension bike with 110 mm of fork travel and 80 mm at the rear. Below you will find all 7 current builds with fork, shock and shock size, plus SAG values in millimetres and a tyre pressure table.

Calculate the setup for your Trek Supercaliber →

All builds

Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, weight and price according to the manufacturer. Wheel size: 29.

BuildForkShockShock sizeRear travelWeightRRPCalculator
SL 9.6 Gen 2RockShox Reba RL (110 mm)RockShox SIDLuxe (IsoStrut)–80 mm–€3,999Setup →
SL 9.7 GX AXS Gen 2RockShox SID (110 mm)RockShox SIDLuxe (IsoStrut)–80 mm–€4,999Setup →
SLR 9.8 X0 AXS T-Type Gen 2RockShox SID Select+ (110 mm)RockShox SIDLuxe (IsoStrut)–80 mm–€6,499Setup →
SLR 9.8 XT Di2 Gen 2FOX 34 SL Factory (110 mm)RockShox SIDLuxe (IsoStrut)–80 mm–€7,999Setup →
SLR 9.8 X0 Flight Attendant Gen 2RockShox SID SL Ultimate Flight Attendant (110 mm)RockShox SIDLuxe Flight Attendant (IsoStrut)–80 mm–€9,999Setup →
SLR 9.9 XTR Di2 Gen 2FOX 34 SL Factory (110 mm)RockShox SIDLuxe (IsoStrut)–80 mm–€9,999Setup →
SLR 9.9 XX Flight Attendant Gen 2RockShox SID SL Ultimate Flight Attendant (110 mm)RockShox SIDLuxe Flight Attendant (IsoStrut)–80 mm–€13,999Setup →

How it compares

At 110 mm, fork travel is 10 mm shorter than the median of the “cross-country full-suspension bike” category (120 mm, 23 bikes). The rear offers 80 mm, 30 mm less than the front. Within Trek’s mountain bikes, it sits between the Trek Marlin and the Trek Procaliber on travel. The frame is made of carbon.

The starting price of €3,999 (SL 9.6 Gen 2) is roughly in line with the category median (€4,350). The top build, SLR 9.9 XX Flight Attendant Gen 2, costs €13,999. Depending on the build, fork and shock come from FOX and RockShox. In total, 5 different forks are used, from the RockShox Reba RL to the RockShox SID SL Ultimate Flight Attendant.

Setup notes for this spec

Target SAG for the Trek Supercaliber

The table converts the recommended SAG percentages into millimetres, so you can check them with the O-ring directly on the stanchion and on the shock shaft. Adjust the air pressure until the value is right. If Trek specifies its own target SAG for your model, that takes priority.

110 mm fork (all builds)

Riding styleFork SAG
XC / touring17 % = 19 mm
Trail20 % = 22 mm
Enduro / rough22 % = 24 mm
Bike park20 % = 22 mm

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

The values apply to 2.40″ wide tubeless tyres with a trail casing. With an inner tube add about 0.2 bar (2.9 psi), with an insert take off about 0.1 bar (1.5 psi).

Ready-to-ride weightFrontRear
60 kg1.43 bar (21 psi)1.63 bar (24 psi)
70 kg1.55 bar (22 psi)1.75 bar (25 psi)
80 kg1.67 bar (24 psi)1.87 bar (27 psi)
90 kg1.79 bar (26 psi)1.99 bar (29 psi)
100 kg1.91 bar (28 psi)2.11 bar (31 psi)
110 kg2.03 bar (29 psi)2.23 bar (32 psi)
120 kg2.15 bar (31 psi)2.35 bar (34 psi)

Air pressure in the fork and shock

You will find a guide value for air pressure on the fork sticker (or on the shock) or in the suspension makers’ charts. Our calculator also takes riding style and rebound into account. In the end, measured SAG is what counts.

Note: no guarantee is given. Specs can vary by model year, size and country; the type plate, the manual and Trek are authoritative. The maximum pressures of fork, shock, tyres and rims always apply.

Sources

More Trek bikes