CUBE AMS Hybrid ONE44: suspension setup & specs

Manufacturer data retrieved on 26 September 2026 · 5 builds · Bike type: Full-suspension e-MTB

The CUBE AMS Hybrid ONE44 is an e-MTB for trail and touring with 140 mm of fork travel and 140 mm at the rear. It is powered by Bosch Performance Line SX. Here you will find all 5 current builds with fork, shock and shock size, plus matching SAG and tyre pressure starting values.

Calculate the setup for your CUBE AMS Hybrid ONE44 →

All builds

Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, motor, weight and price according to the manufacturer. Wheel size: 29.

Build	Fork	Shock	Shock size	Rear travel	Motor	Weight	RRP	Calculator
C:62 Pro 400X	FOX 34 Float Rhythm GRIP (140 mm)	FOX Float Rhythm RC	210x55	140 mm	Bosch Performance Line SX 400 Wh	18.1 kg	–	Setup →
C:62 Race 400X	RockShox Psylo Gold RC Air (140 mm)	RockShox Super Deluxe Select+	210x55	140 mm	Bosch Performance Line SX 400 Wh	19.8 kg	–	Setup →
C:68X SLT 400X	FOX 36 Float SL Factory GRIP X2 (140 mm)	FOX Float Factory	210x55	140 mm	Bosch Performance Line SX 400 Wh	16.8 kg	–	Setup →
C:68X SLX 400X	FOX 36 Float SL Performance GRIP (140 mm)	FOX Float Performance	210x55	140 mm	Bosch Performance Line SX 400 Wh	17.5 kg	–	Setup →
C:68X TM 400X	FOX 36 Float Performance (140 mm)	FOX Float X Performance	210x55	140 mm	Bosch Performance Line SX 400 Wh	18.7 kg	–	Setup →

How it compares

With 140 mm of fork travel, the CUBE AMS Hybrid ONE44 is on the shorter side; the median of the 101 comparable bikes in the “e-MTB for trail and touring” category is 150 mm. Travel is the same front and rear at 140 mm each. On travel, it slots in between the CUBE Stereo Hybrid ONE22 and the CUBE Stereo Hybrid ONE44 HPC in the CUBE range. The frame is made of carbon.

The CUBE AMS Hybrid ONE44 does well on weight: 16.8 kg for the C:68X SLT 400X build is 6.6 kg below the median of comparable bikes (23.4 kg). There are 3.0 kg between the lightest and the heaviest build. For suspension, CUBE combines components from FOX and RockShox. In total, 5 different forks are used, from the FOX 34 Float Rhythm GRIP to the FOX 36 Float Performance. It is powered by Bosch Performance Line SX with a 400 Wh battery.

Setup notes for this spec

Fork (FOX 34 Float Rhythm GRIP): air goes in through the valve on top of the left leg. After every change, compress the fork firmly a few times before measuring SAG.
Rebound: on FOX and RockShox suspension the rebound adjuster is red. Always count clicks from fully closed (clockwise to the stop) so you can return to any setting.
Shock (FOX Float Rhythm RC): get on the bike in your normal riding position, step off carefully and read the O-ring. Always cycle the shock a few times after pumping.
e-MTB: because of the extra weight, start with slightly more tyre pressure – the surcharge is already built into the table below.

Target SAG for the CUBE AMS Hybrid ONE44

Instead of percentages, this table gives SAG directly in millimetres, measurable with the O-ring on the stanchion and on the shock shaft. Change the pressure step by step until you reach the value; if CUBE gives its own target SAG, use that.

140 mm fork, 55.0 mm shock stroke (all builds)

Riding style	Fork SAG	Shock SAG
XC / touring	17 % = 24 mm	24 % = 13.2 mm on the shock shaft
Trail	20 % = 28 mm	28 % = 15.4 mm on the shock shaft
Enduro / rough	22 % = 31 mm	30 % = 16.5 mm on the shock shaft
Bike park	20 % = 28 mm	27 % = 14.9 mm on the shock shaft

How to measure SAG is explained in our guide SAG setup.

Tyre pressure starting values

For 2.40″ wide tyres, tubeless with a trail casing, including the e-MTB surcharge. With an inner tube about 0.2 bar (2.9 psi) more, with an insert about 0.1 bar (1.5 psi) less. Stock tyres: Continental Magnotal Trail Soft 2.4; Continental Xynotal 2.4; Schwalbe Magic Mary / Nobby Nic 2.4; Schwalbe Nobby Nic / Wicked Will 2.4; Schwalbe Nobby Nic Performance 2.4.

Ready-to-ride weight	Front	Rear
60 kg	1.48 bar (21 psi)	1.68 bar (24 psi)
70 kg	1.60 bar (23 psi)	1.80 bar (26 psi)
80 kg	1.72 bar (25 psi)	1.92 bar (28 psi)
90 kg	1.84 bar (27 psi)	2.04 bar (30 psi)
100 kg	1.96 bar (28 psi)	2.16 bar (31 psi)
110 kg	2.08 bar (30 psi)	2.28 bar (33 psi)
120 kg	2.20 bar (32 psi)	2.40 bar (35 psi)

Air pressure in the fork and shock

You will find a guide value for air pressure on the fork sticker (or on the shock) or in the suspension makers’ charts. Our calculator also takes riding style and rebound into account. In the end, measured SAG is what counts.

Note: all values without guarantee. Specification can vary by model year, frame size and market – if in doubt, the type plate, the manual and CUBE’s information apply. Never exceed maximum pressures.