CUBE Stereo Hybrid ONE44 HPC: suspension setup & specs
The CUBE Stereo Hybrid ONE44 HPC is an e-MTB for trail and touring with 150 mm of fork travel and 140 mm at the rear. It is powered by Bosch Performance Line CX or Bosch Performance Line CX-R or DJI Avinox M2S. Below you will find all 9 current builds with fork, shock and shock size, plus SAG values in millimetres and a tyre pressure table.
Calculate the setup for your CUBE Stereo Hybrid ONE44 HPC →
All builds
Fork, shock, shock size (eye-to-eye length × stroke) and rear travel, motor, weight and price according to the manufacturer. Wheel size: 29 (S: 27.5).
| Build | Fork | Shock | Shock size | Rear travel | Motor | Weight | RRP | Calculator |
|---|---|---|---|---|---|---|---|---|
| AT 800 | FOX 36 Float Factory GRIP X (150 mm) | FOX Float X Factory | 230x60 | 140 mm | Bosch Performance Line CX 800 Wh | 24.3 kg | – | Setup → |
| EXC 800 | RockShox Psylo Gold RC Air (150 mm) | RockShox Deluxe Select+ | 230x60 | 140 mm | DJI Avinox M2S 800 Wh | 24.6 kg | – | Setup → |
| Pro 800 | RockShox Psylo Silver RC Air (150 mm) | RockShox Deluxe Select R | 230x60 | 140 mm | Bosch Performance Line CX 800 Wh | 24.6 kg | – | Setup → |
| Race 800 | FOX 36 Float Rhythm GRIP (150 mm) | FOX Float Rhythm RC | 230x60 | 140 mm | Bosch Performance Line CX 800 Wh | 24.5 kg | – | Setup → |
| SLT 800 | FOX 36 Float Factory GRIP X2 (150 mm) | FOX Float X Factory | 230x60 | 140 mm | Bosch Performance Line CX-R 800 Wh | 23.4 kg | – | Setup → |
| SLX 800 | FOX 36 Float Performance GRIP (150 mm) | FOX Float Performance | 230x60 | 140 mm | Bosch Performance Line CX 800 Wh | 24.4 kg | – | Setup → |
| SLX Evo 800 | FOX 36 Float Performance GRIP (150 mm) | FOX Float Performance | 230x60 | 140 mm | Bosch Performance Line CX 800 Wh | 24.7 kg | – | Setup → |
| Super TM 800 | RockShox ZEB Ultimate Charger 3.2 RC2 Air (150 mm) | RockShox Super Deluxe Ultimate | 230x60 | 140 mm | DJI Avinox M2S 800 Wh | 24.4 kg | – | Setup → |
| TM 800 | RockShox Lyrik Select+ Charger 3.2 RC2 Air (150 mm) | RockShox Super Deluxe Select | 230x60 | 140 mm | Bosch Performance Line CX 800 Wh | 24.4 kg | – | Setup → |
How it compares
On travel, the CUBE Stereo Hybrid ONE44 HPC is right where the “e-MTB for trail and touring” category usually is: 150 mm up front against a median of 150 mm from 101 bikes. The rear offers 140 mm, 10 mm less than the front. Within CUBE’s e-mountain bikes, it sits between the CUBE Stereo Hybrid ONE44 and the CUBE AMS Hybrid 177 C:62 on travel. The frame is available in carbon or aluminium.
At 23.4 kg (SLT 800 build), the weight is close to the category median of 23.4 kg. There are 1.3 kg between the lightest and the heaviest build. For suspension, CUBE combines components from FOX and RockShox. The fork line-up ranges from the FOX 36 Float Factory GRIP X to the RockShox Lyrik Select+ Charger 3.2 RC2 Air. Drive comes from Bosch Performance Line CX or DJI Avinox M2S or Bosch Performance Line CX-R, paired with 800 Wh of battery capacity.
Setup notes for this spec
- Air fork (FOX 36 Float Factory GRIP X): the air valve is on top of the left leg under a cap. Change pressure in small steps (about 5 psi (0.34 bar)) and cycle the fork a few times afterwards so the air chambers can equalise.
- Rebound: on FOX and RockShox suspension the rebound adjuster is red. Always count clicks from fully closed (clockwise to the stop) so you can return to any setting.
- Air shock (FOX Float X Factory): measure SAG in your riding position, ideally with a helper holding the bike. Cycle the shock a few times after every pressure change.
- e-MTB: the extra weight mainly affects tyre pressure, which is why the table below already includes a surcharge. SAG is measured just as on a bike without a motor.
Target SAG for the CUBE Stereo Hybrid ONE44 HPC
SAG is the share of travel your weight already uses in the riding position. The table gives it straight in millimetres – read the O-ring on the stanchion and on the shock shaft and adjust the air pressure until it matches. Any figures from CUBE take priority.
150 mm fork, 60.0 mm shock stroke (all builds)
| Riding style | Fork SAG | Shock SAG |
|---|---|---|
| XC / touring | 17 % = 26 mm | 24 % = 14.4 mm on the shock shaft |
| Trail | 20 % = 30 mm | 28 % = 16.8 mm on the shock shaft |
| Enduro / rough | 22 % = 33 mm | 30 % = 18.0 mm on the shock shaft |
| Bike park | 20 % = 30 mm | 27 % = 16.2 mm on the shock shaft |
How to measure SAG is explained in our guide SAG setup.
Tyre pressure starting values
The values apply to 2.50″ wide tubeless tyres with a trail casing, including the e-MTB surcharge. With an inner tube add about 0.2 bar (2.9 psi), with an insert take off about 0.1 bar (1.5 psi). Stock tyres: Continental Kryptotal 2.4; Schwalbe Albert Trail Pro / Gravity Pro 2.5; Schwalbe Magic Mary Trail Pro / Albert Gravity Pro 2.5; Schwalbe Nobby Nic Performance 2.6.
| Ready-to-ride weight | Front | Rear |
|---|---|---|
| 60 kg | 1.48 bar (21 psi) | 1.68 bar (24 psi) |
| 70 kg | 1.60 bar (23 psi) | 1.80 bar (26 psi) |
| 80 kg | 1.72 bar (25 psi) | 1.92 bar (28 psi) |
| 90 kg | 1.84 bar (27 psi) | 2.04 bar (30 psi) |
| 100 kg | 1.96 bar (28 psi) | 2.16 bar (31 psi) |
| 110 kg | 2.08 bar (30 psi) | 2.28 bar (33 psi) |
| 120 kg | 2.20 bar (32 psi) | 2.40 bar (35 psi) |
Air pressure in the fork and shock
You will find a guide value for air pressure on the fork sticker (or on the shock) or in the suspension makers’ charts. Our calculator also takes riding style and rebound into account. In the end, measured SAG is what counts.
Sources
- Stereo Hybrid ONE44 HPC AT 800
- Stereo Hybrid ONE44 HPC EXC 800
- Stereo Hybrid ONE44 HPC Pro 800
- Stereo Hybrid ONE44 HPC Race 800
- Stereo Hybrid ONE44 HPC SLT 800
- Stereo Hybrid ONE44 HPC SLX 800
- Stereo Hybrid ONE44 HPC SLX Evo 800
- Stereo Hybrid ONE44 HPC Super TM 800
- Stereo Hybrid ONE44 HPC TM 800