R Raymon Nayta: suspension setup & specs
The R Raymon Nayta is a cross-country hardtail with 100 mm of fork travel. This page lists the 5 current builds with fork and gives matching starting values for SAG and tyre pressure.
Calculate the setup for your R Raymon Nayta →
All builds
Fork, weight and price according to the manufacturer. Wheel size: 27.5.
| Build | Fork | Weight | RRP | Calculator |
|---|---|---|---|---|
| 27.5" | SR Suntour XCE28 (100 mm) | – | – | Setup → |
| Comp 27.5" | SR Suntour XCT30 HLO (100 mm) | – | – | Setup → |
| Pro 27.5" | SR Suntour XCT30 HLO (100 mm) | – | – | Setup → |
| Street 27.5" | SR Suntour XCE28 (100 mm) | – | – | Setup → |
| Ultra 27.5" | RockShox Judy Silver TK (100 mm) | – | – | Setup → |
How it compares
100 mm at the fork almost exactly matches the 100 mm median of the 46 bikes in the “cross-country hardtail” category in our database. Of R Raymon’s mountain bikes, the R Raymon Nayta offers the least travel up front. The frame is made of aluminium.
The fork line-up ranges from the SR Suntour XCE28 to the RockShox Judy Silver TK.
Setup notes for this spec
- Air fork (RockShox Judy Silver TK): the air valve is on top of the left leg under a cap. Change pressure in small steps (about 5 psi (0.34 bar)) and cycle the fork a few times afterwards so the air chambers can equalise.
- Rebound: turn the red RockShox adjuster fully closed first and count clicks from there – that way you can note settings and restore them later.
- Hardtail: without rear suspension, rear tyre pressure largely decides comfort and traction – it is worth testing in 0.1 bar (1.5 psi) steps.
Target SAG for the R Raymon Nayta
The table converts the recommended SAG percentages into millimetres, so you can check them with the O-ring directly on the stanchion. Adjust the air pressure until the value is right. If R Raymon specifies its own target SAG for your model, that takes priority.
100 mm fork (all builds)
| Riding style | Fork SAG |
|---|---|
| XC / touring | 17 % = 17 mm |
| Trail | 20 % = 20 mm |
| Enduro / rough | 22 % = 22 mm |
| Bike park | 20 % = 20 mm |
How to measure SAG is explained in our guide SAG setup.
Tyre pressure starting values
For 2.40″ wide tyres, tubeless with a trail casing. With an inner tube about 0.2 bar (2.9 psi) more, with an insert about 0.1 bar (1.5 psi) less. Stock tyres: Maxxis Ikon, 27.5x2.2; Schwalbe Smart Sam, Active, Reflex, 54-584, 27.5x2.10.
| Ready-to-ride weight | Front | Rear |
|---|---|---|
| 60 kg | 1.43 bar (21 psi) | 1.63 bar (24 psi) |
| 70 kg | 1.55 bar (22 psi) | 1.75 bar (25 psi) |
| 80 kg | 1.67 bar (24 psi) | 1.87 bar (27 psi) |
| 90 kg | 1.79 bar (26 psi) | 1.99 bar (29 psi) |
| 100 kg | 1.91 bar (28 psi) | 2.11 bar (31 psi) |
| 110 kg | 2.03 bar (29 psi) | 2.23 bar (32 psi) |
| 120 kg | 2.15 bar (31 psi) | 2.35 bar (34 psi) |
Air pressure in the fork
You will find a suitable starting pressure on the sticker on the fork stanchion or in the suspension manufacturers’ setup charts. Our calculator gives you a starting value including rebound for your weight and riding style. What matters afterwards is the measured SAG from the table above.